Threaded Stud M16*1000 Studs Are A Fastener That Is A Cylindrical Rod With An External Thread. Studs Are Made From Stainless Steel, Alloy Steel, And Carbon Steel. Gost Iso 8992-2015, Technical Plate, Rubber Tmkshch (Heat, Frost, Acid, Alkali Resistant) 4 Mm, Width 1000 Mm Gost 7338-90, M16 Nut Is A Fastener That Has A Threaded Hole, Attached To A Screw, Bolt Or Stud According To Gost 5915-70,, Bolt M16x90x70 (Full Thread) Is A Fastener, Which Is A Threaded Rod With A Hexagonal Head Gost 7798-70, Steel Clamping Flange Dn 280 (For Hdpe Pipes) Has Characteristics Including Material (Often Steel 20), Nominal Pressure (Pn 10 Or Pn 16), External Diameter Of About 390 Mm, Center-To-Center Distance Of Mounting Holes 350 Mm, Number And Diameter Of Holes (Usually 8 Holes, Diameter 22-24 Mm), And Is Also Designed For Operation In A Wide Temperature Range, With An Internal Diameter Bored For Hdpe Bushing 280 Mm For Ease Of Installation. Gost 18599-2001, Type: Flat Clamp (Collar) Or Free (Slip-On), Often Bored To Fit Hdpe Bushing. Conventional Diameter (Dn/Dn): 280 Mm. Working Pressure (Py): 10 Kgf/Cm² (Or 1.0 Mpa). Material: Steel Grade St. 20. Temperature Range: From -70°C To +300°C. Flange Outer Diameter: ~390 Mm. Center-To-Center Distance Of Mounting Holes (D1): ~350 Mm. Weight: ~12.9 Kg (For Flat For Sleeve Dn 280 Ru 10). Design Features: Boring Of The Inner Surface For The Polyethylene Bushing Prevents Damage To The Bushing Collar During Tightening, Ensuring A Tight Connection. Gost 33259-2015.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
