Request For Quotation Purchasing Materials For Conducting Industrial Training Lessons

Steel, Welding, Diameter 1-1.5 Mm Solid Section Welding Wire Sv-08G2s, Ø 1.2 Mm (Esab Welding Wire Sv-08G2s 1.2 Mm, 18 Kg.) Is A Classic Copper-Plated Welding Wire That Fully Meets The Requirements Of Gost 2246. However, The Rolled Material Supplied To Much More Stringent Technical Conditions And Careful Control Over The Technological Process Of Its Manufacture Guarantee To The Consumer Significantly Higher Welding And Technological Characteristics And Stable Mechanical Properties Of The Deposited Metal. Wire With A Diameter Of 1.2 Mm Is Approved For Use For All Types Of Bridge Structures (Including Railways) In Normal Climatic Conditions (Operating Temperature Up To -40°C). Reducing The Upper Threshold For Mn Makes It Possible To Use This Wire For Welding Not Only In Pure Carbon Dioxide, But Also In The M21 Argon Mixture Without Fear Of Overalloying The Deposited Metal With This Element, And, As A Consequence, Maintaining High Plastic Properties Of The Weld At Subzero Temperatures. Coil 18 Kg. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Grade Ots On, Thickness 0.5-2 Mm, Cold Rolled Galvanized Steel Sheet, General Purpose, 0.8 Mm Thick. Dimensions: 1250*2500 Mm.., Steel Type: Listing Of Steel Types. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Electrocorundum Abrasive, Bakelite Bonded, Grinding Abrasive Grinding Wheel (Luga O 150X20x12.7 Mm, P60, Abrasive Grinding Wheel 3655-150-12.7) 150*20*12.7 Mm, Designed For Grinding And Sharpening Various Metal Products. The Ceramic Bond Of Abrasive Grain Allows For Both Primary And Final Sharpening Of Cutting Tools. It Is A Replacement Element For Sharpening Machines. The Use Of High-Quality Raw Materials Ensures A Long Service Life Of The Grinding Wheel. External Diameter Not Less Than 150 Mm; Inner Diameter Not Less Than 12.7 Mm; Thickness Not Less Than 20 Mm; Grain P60; Material - Aluminum Oxide (Electrocorundum); Straight Profile Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Male, For Protection Against Mechanical Influences, Water And Alkalis, Made Of Fabric Suit Damask Dark Blue/Cornflower. Suit - Jacket And Trousers. Jacket With Central Button Fastening. The Yoke Of The Shelf And Back Is Made Of Finishing Fabric. Convenient Patch Pockets On The Jacket, An Additional Chest Pocket With A Flap. Trousers With A Zipper. Strengthening In The Knees And Elbows. Material: Greta 50% Cotton + 50% Pe Pl. 210 G/M2. According To Gost 27575-87. 10 Sets Of Sizes 48-50, Size 170 – 176; 5 Sets Of Sizes 52-54, Size 182 - 188. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Electrocorundum Abrasive, Bakelite Bonded, Grinding Abrasive Grinding Wheel (Luga O 200X20x16 Mm, P60, Abrasive Grinding Wheel 3655-200-16) 200*20*16 Mm, Designed For Grinding And Sharpening Various Metal Products. The Ceramic Bond Of Abrasive Grain Allows For Both Primary And Final Sharpening Of Cutting Tools. It Is A Replacement Element For Sharpening Machines. The Use Of High-Quality Raw Materials Ensures A Long Service Life Of The Grinding Wheel. External Diameter Not Less Than 200 Mm; Inner Diameter Not Less Than 16 Mm; Thickness Not Less Than 20 Mm; Grain P60; Material - Aluminum Oxide (Electrocorundum); Straight Profile Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Protective Safety Glasses (Stayer Master Transparent Open Type 11041_Z01) Transparent Open Type - Designed To Protect The Organs Of Vision From Solid Flying Particles. The Monolens Of The Glasses Is Made Of Impact-Resistant Polycarbonate. Length Not Less Than 250 Mm; Width Not Less Than 50 Mm; Height Not Less Than 95 Mm. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Coal Carpenters Square 250 Mm. Startul Master (St3510-025) - Used To Determine The Right Angle When Marking Or Matching On Already Connected Parts. Has Strict Compliance With The Standard. The Tool Is Easy To Use - Suitable For Carpentry And Metalworking Workshops. It Has Optimal Dimensions For Precision Work. Material – Metal; The Length Of The Larger Side Is At Least 250 Mm; Marking On Both Sides; Two Operating Angles: 45 And 90 Degrees. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, For Carpentry And Plumbing Work Files Of The “Professional” Series (1681-15-H5_Z01, Stayer 150 Mm, 5 Pcs., Set Of Files) Are Made Of High-Quality Tool Steel And Subjected To Multi-Stage Hardening For A Long Service Life. Provides High Speed And Quality Of Work. They Are Used When Working With Metal, For Processing Surfaces Of Various Shapes, Sharp Edges And Protrusions, As Well As For Removing Burrs. The Package (Cardboard Box) Contains At Least 5 Fingertips, The Following Types: Flat, Semicircular, Triangular, Square, Round. Notch Type - No. 2; Material – U12a Steel; Total Length Not Less Than 310 Mm; Working Length Not Less Than 170 Mm; Handle – Two-Component, Ergonomic. Double Cut Teeth. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Made Of Carbide Steel, With Curved Tip Marker For Metal Bison Expert Vk8 – Marking Carbide Pencil For Metal Bison Vk-8, Length No Less Than 150 Mm, Diameter No Less Than 6 Mm, Weight No Less Than 36 G. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Flat-Oval Section Chisel With Protector King Tony 18X190mm 76218-75G - Made Of Tool Alloy Steel With The Addition Of Molybdenum. Special Additives Included In The Alloy Give The Tool Special Strength And Resistance To Chipping, Which Is Important For Safe Operation. The Polished Surface Of The Chisel Protects Against Moisture And Dirt. The Comfortable Chisel Handle Is Made Of Durable Plastic Coated With A Soft Rubber-Based Material. This Handle Protects Your Hand Well From Recoil While Working With A Chisel. Length Not Less Than 190 Mm; The Width Of The Working Part Is At Least 18 Mm; Availability Of A Protector; Purpose: For Metal. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Locksmith Bench Hammer, Matrix 10322, With A Square Head Weighing 400 G And A Fiberglass Rubberized Handle. The Head Is Made Of Steel Grade 50. The Working Surface Of The Head Has A Hardness Of 52 Hrc At A Depth Of At Least 5 Mm. Head Forging Improves The Metal Structure By Increasing Uniformity And Grain Refinement, Which Increases Strength And Wear Resistance. The Head Is Milled, Sanded And Painted For Corrosion Protection. The Tool Handle Is Made Of Fiberglass, Which Has High Mechanical Strength, Lightness And Is Resistant To Aggressive Environments (Oils, Gasoline, Solvents, Etc.). Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, The Metal Measuring Ruler Sparta 500Mm 305085 With A Measurement Limit Of 500 Mm Is Intended For Determining The Dimensions Of Parts, Marking Surfaces And Drawing Straight Lines. The Measuring Ruler Is Made Of Tool Alloy Steel (Steel Grade – 45). The Metric Scale Is Made By Etching. Double Sided Scale. Divisions – 1 Mm. Units Of Measurement: Mm, Cm. Supplied In Packaging. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Manual Riveter Cast Matrix Pro 2.4-4.8 Mm. 200 Mm. 40546 - Designed For Fastening Metal Sheets Using Blind Rivets. The Set Includes Four Nozzles For Rivets 2.4, 3.2, 4.0 And 4.8 Mm. The Three-Segment Collet Clamp Is Made Of Cr-Mo Alloy. Thanks To This, This Mechanism Creates A Reliable Fixation Of The Pull Pin. Package Contents: Riveter - 1 Pc., Nozzle For Rivets 2.4 Mm - 1 Pc., Nozzle For Rivets 3.2 Mm - 1 Pc., Nozzle For Rivets 4 Mm - 1 Pc., Nozzle For Rivets 4.8 Mm - 1 Pc. The Maximum Bonded Thickness Is At Least 45 Mm. The Length Of The Riveter Is At Least 200 Mm. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Gost 9466-75. Metal, Melting, Coated Electrodes Mr-3 Ars, 3 Mm. (Mr-3 Ars Tm Arsenal, 3 Mm) Are Used For Welding Low-Carbon Steels Using The Manual Arc Method (Mma). The Electrodes Are Suitable For Work On Alternating (Ac) And Direct (Dc) Currents Of Reverse Polarity And Allow Welding To Be Performed In Various Spatial Positions Of The Seam, Except Vertical From Top To Bottom. The Coating Of Welding Electrodes Is Rutile. Welding Electrodes Mr-3 Ars Are Intended For Manual Arc Welding Of Structures Made Of Carbon Steel Grades In Accordance With Dstu 2651/Gost 380-2005 (St 0, St 1, St 2, St 3) Of All Degrees Of Deoxidation - “Kp”, “Ps”, “Sp” And Gost 1050-88 (05Kp, 08Kp, 08Ps, 08, 10Kp, 10Ps, 10, 15Kp, 15Ps, 15, 20Kp, 20Ps, 20). In A Pack - 2.5 Kg. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817, Grade Ots On, Thickness 0.5-2 Mm, Cold Rolled Galvanized Steel Sheet, General Purpose, 0.5 Mm Thick. Dimensions: 1250*2500 Mm.., Steel Type: Listing Of Steel Types. Delivery And Unloading Of Goods To The Customer’S Warehouse, At The Expense Of The Supplier’S Funds And Efforts. Delivery Is Carried Out To The Address: Karaganda, St. Magnitogorskaya, Building 24/1. Contact Person By Agreement - Shetenov Edil Nurzhuarovich, Tel. +7-771-259-2079. Contact Person, Storekeeper – Svetlana Vasilievna Dergunova, Tel. +7 776-270-7817