Request For Quotation Purchase Of Worldskills Plumbing Products

Transition 50 To 100 Sewer Pvc Eccentric Transition D 110 X 50 Mm Is Used To Connect Two Pipes Of Different Diameters. Without Any Extra Effort, You Will Lay All Utilities Inside Your Home. The Gray Sewer Conversion Kit Includes O-Rings, 2 Pcs. For A More Reliable Connection, It Is Recommended To Treat All Communications Joints With Plumbing Silicone; It Will Prevent Leaks And The Appearance Of Fungus (Pre-Agreed With The Customer), Bronze Adapter D=20M-15P (Pre-Agreed With The Customer), Screw 10 The Fasteners Are Tightened With A Screwdriver With An Attachment Of The Appropriate Size For The Hex Head Of The Self-Tapping Screw. (Pre-Agreed With The Customer), Bend D=50 Sewer Pvc Bend For Connecting Elements Of A Polyvinyl Chloride Pipeline Of Sewer Pipes At An Angle Of 90° To Each Other. Installation Is Carried Out Using The Socket Joint Method. (Pre-Agreed With The Customer), Ppr Bridge D=20 Bridge Is Used For Wiring Two Pipes, But Not Connecting Them, But Running Them At Different Levels - One Above The Other. The Bypass Bridge Is Installed On The Main Lines, And With The Help Of Special Fasteners, Polypropylene Pipes Are Connected On The Same Line As Reliably As Possible. (Pre-Agreed With The Customer), Ppr Coupling D=20 Coupling (Connector) Ppr 25 Mm Is A Type Of Polypropylene Fitting, Which Is Designed To Connect Polypropylene Pipes Of 25 Diameter To Each Other Using Socket Thermal Welding. (Pre-Agreed With The Customer, Fastening Shell The Riving Screw Is Originally Designed, Having Two Threads On A Rod With A Bare Middle. (Pre-Agreed With The Customer), Valve D=15 One Side Internal One Side External Brass Ball Valves 11B27p1 Have Long Established Themselves As Reliable And Trouble-Free Pipeline Fittings. Gost 34292-2017 (Pre-Agreed With The Customer), Tee D=100 Pvc The Pvc Tee Is Designed For Connecting Smaller Diameter Pipes To The Main Pipe And Consists Of A Socket For Connection And A Smooth End With A Chamfer With An Abutment Angle Of 87°. High Strength Of The Connection With The Pipe And Ease Of Installation Are Ensured By The Presence Of A Rubber Ring, Which Is Included In The Delivery Package, And The High-Quality Material From Which The Tee Is Made. (Pre-Agreed With The Customer), Pipe D=100 -2 Meters Pipes Are Manufactured By Single- Or Multi-Layer Continuous Extrusion With Subsequent Cutting To Size According To The Standard. (Pre-Agreed With The Customer), Rubberized Clamp With Studs D=25-32 Consists Of Two Steel Arches Connected Into A Single Unit With Tightening Bolts. Equipped With A Rubber Profile, Which Allows You To Reduce The Level Of Pressure On The Pipes, Reduce Vibrations, Compensate For Thermal Expansion And Extend The Service Life Of The Gost 28191-89 System (Preliminary Agreement With The Customer), Ppr Adapter External Thread D=20 (To Be Previously Agreed With The Customer), Pipe Cutter For Plastic Pipes 6-67 Mm Pipe Cutter Super-Ego Automatic 1 For Plastic Pipes 6-67 Mm 750010000 - Pipe Cutter For Plastic Pipes With A Diameter Of 6-67 Mm, With A Folding Deburr. When Changing The Cutting Roller, You Can Cut Copper And Metal-Plastic Pipes. Reinforced Aluminum Housing And Guide With Stop Mechanism To Protect The Cutting Roller. Extra-Long Roller Guides With Groove For Cutting Close To The Flange. Ergonomic Handle With Spare Cutting Roller Built Into The Handle. Quick Adjustment To The Pipe, Optimally Suited For Work In Limited Space (Pre-Agreed With The Customer), Straight Steel Radiator Tap D=15 They Are Widely Used In Various Areas Where Installation Or Installation Of Pipelines Is Necessary. Gost 34292-2017 (Pre-Agreed With The Customer), Siphon Toilet The Most Important Part Of Any Toilet Is The Siphon Unit, Through Which Flush Water Flows Into The Sewer Pipe. (Pre-Agreed With The Customer), Copper Pipe D=20 Copper Pipes Are Used In All Industries That Produce Similar Units. Their Cost Has Always Been Higher Than Other Analogues, Due To Their High Quality Characteristics. (Pre-Agreed With The Customer), Copper Outlet D=20 Copper Fittings Are A Connecting Device For Pipes. Most Often They Are Installed Where It Is Necessary To Branch A Pipe Channel Or Rotate The Entire Pipeline Structure To A Certain Angle (Pre-Agreed With The Customer), Cast Iron Tee D=20 Cast Iron Tee And Outlet Du-50 Is A Connecting Element Of Pipelines, Usually Used On The Main Line For Permanent Or Temporary Threaded Connection Of Pipes. The Cast Iron Tee Serves To Branch The Flow Of The Transported Medium. Gost 5525-88 (Pre-Agreed With The Customer), Pipe D=100 -1 Meter Pipes Are Manufactured By Single- Or Multi-Layer Continuous Extrusion With Subsequent Cutting To Size According To The Standard. (Pre-Agreed With The Customer), Screw 5 The Fasteners Are Tightened With A Screwdriver With An Attachment Of The Appropriate Size For The Hexagonal Head Of The Self-Tapping Screw. (Pre-Agreed With The Customer), Cast Iron Bend D=20 Du-50 Cast Iron Bend Is A Connecting Element Of Pipelines, Usually Used On The Main Line For Permanent Or Temporary Threaded Connection Of Pipes. The Cast Iron Tee Serves To Branch The Flow Of The Transported Medium. Gost 6942-98 (Pre-Agreed With The Customer), Ppr Polypropylene Pipe D=20 Metal-Plastic Pipe Is An Innovative Solution To Problems With Domestic Water Supply. Used To Provide Hot And Cold Water Supply In Residential And Non-Residential Premises. (Pre-Agreed With The Customer), Pipe D=50 - 0.5 Meter Pipes Are Manufactured By Single- Or Multi-Layer Continuous Extrusion With Subsequent Cutting To Size According To The Standard. (Pre-Agreed With The Customer), Clips For Fastening Pipes -Ppr -Du20 Designed For Fastening Smooth Pvc Pipes Or Corrugated Pipes Of The Same Diameter To The Surface Of Walls, Ceilings, Floors Or Partitions. For Installation, A Technological Hole Is Provided For A Dowel Or Self-Tapping Screw. (Pre-Agreed With The Customer), Shower Drain 50Mm Metal Shower Drain Is A Drain Hole That Is Installed In The Bathroom Floor Under The Tiles. It Is Used In Prefabricated Stationary Shower Cabins That Do Not Have A Tray. The Design Resembles A Funnel That Collects Water And Drains It Into A Sewer Pipe. Gost 1811-97 (Pre-Agreed With The Customer), Rubberized Clamp With Studs D=100 Consists Of Two Steel Arches Connected Into A Single Unit With Tightening Bolts. Equipped With A Rubber Profile, Which Allows You To Reduce The Level Of Pressure On The Pipes, Reduce Vibrations, Compensate For Thermal Expansion And Extend The Service Life Of The System. Gost 28191-89 (Pre-Agreed With The Customer), Toilet Mounting Kit A Set For Attaching A Toilet To The Floor Is Used When Installing Plumbing Fixtures With A Base Height Of 10 Mm In A Toilet, Bathroom Or Bathroom (Pre-Agreed With The Customer), Miter Saw Miter Saw Zpt-190-1100 L Is A Necessary Tool For Quickly Cutting Wood Materials. It Allows For Straight, Bevel And Combined Sawing At An Angle Of Up To 45 Degrees. Gost 980-80 (Pre-Agreed With The Customer), Gas Valve D=20 Ball Valves Are Certified For Use In Natural And Liquefied Petroleum Gas Supply Systems With Operating Pressure Up To 3 Bar (0.3 Mpa). Gost 34292-2017 (Pre-Agreed With The Customer), Pipe D=50 -2 Meters Pipes Are Manufactured By Single- Or Multi-Layer Continuous Extrusion With Subsequent Cutting To Size According To The Standard. (Pre-Agreed With The Customer), Valve D=15 With Internal Thread On Both Sides. Brass Ball Valves 11B27p1 Have Long Established Themselves As Reliable And Trouble-Free Pipeline Fittings. Gost 34292-2017 (Pre-Agreed With The Customer), Tee D=50 Pvc The Pvc Tee Is Designed For Connecting Smaller Diameter Pipes To The Main Pipe And Consists Of A Socket For Connection And A Smooth End With A Chamfer With An Abutment Angle Of 87°. Gost 13961-74 (Pre-Agreed With The Customer), Template For Inserting Hinges Arsta Ar8760, Steel Material Steel Milling Length 30 Working Width 130 Mm Weight 4 Kg (Pre-Agreed With The Customer), Tee Ppr D=20 A Transition Tee Is A Connecting Element That Is Specialized For Narrowing Or Expanding The Capacity Of Polypropylene Pipes And Its Branching. The Connection Is Made By Thermal Sleeve Welding Using Special Welding Equipment. (Pre-Agreed With The Customer), Plug D=100 Sewer Plug For Sewer Pipe Gost 32414-2013 (Pre-Agreed With The Customer), Pipe D=20 Seamless Cold-Drawn Seamless Pipe Is Produced By Cold Drawing (Drawing) Or Rolling A Hot-Rolled Steel Sleeve On A Special Mill. 6 Meters Each (Pre-Agreed With The Customer), Siphon For Sink 1.5 M This Device Is A Curved Device In The Form Of A Thin Tube, Which Is Connected To The Washbasin From Its Lower Part. (Pre-Agreed With The Customer), Revision D 100 Revision 110 Mm Thickness 3.2 Mm Sewer With Cover Is Used In Domestic Sewage Systems For Inspection Of Sewer Pipelines. Thanks To The Screw-On Lid, There Is Easy And Simple Access To The Inside Of The Sewer System To Check Blockages Or Clean It. (Pre-Agreed With The Customer), Flexible Hose 60Cm For Sink Plumbing Hoses, Also Called Flexible Hoses, Have A Double Braid And Are Suitable For Both Hot And Cold Water. Long Service Life, Reliability, Low Price - All This Is Inherent In Flexible Hoses. (Pre-Agreed With The Customer), Adapter With External Thread D=15 Copper Reducers Are Pipeline Fittings That Are Used To Connect Pipes With Different Diameters. (Pre-Agreed With The Customer), Pipe D=100 - 0.5 Meter Pipes Are Manufactured By Single- Or Multi-Layer Continuous Extrusion With Subsequent Cutting To Size According To The Standard. (Pre-Agreed With The Customer), Ppr Strip D=20 Internal Thread 1/2 High-Quality Short Bypass Bridges 25 Mm Polypropylene From The Manufacturer Of The Deniz Brand For Heating And Water Supply. (Pre-Agreed With The Customer), Gas Hose Yellow 15Mm Internal Thread 80Cm Flexible Pvc Gas Hose (Pipeline) For Domestic And Industrial Purposes For Supplying Natural Or Liquefied Gas, At A Maximum Operating Pressure Of No More Than 1 Mpa, To Gas Stoves And Other Gas Appliances, Internal Pipelines Or Individual Cylinder Installations, In Residential Buildings With A Connection To The Central Network. (Pre-Agreed With The Customer), Ppr Branch D=20 This Is A Part Of A Plumbing Fitting, Which Is Designed To Connect Pipes At An Angle Of 90 Degrees Into A Single Pipeline System. Widely Used In The Installation Of Water Supply, Heating, Floor And Central Heating Systems. Installation Is Carried Out Using The Socket Welding Method. (Pre-Agreed With The Customer)