Request For Quotation Purchasing Industrial Supplies For Electricians

Dielectric Tool Set Kvt - Used For Safe Electrical Work. The Entire Tool Is Fully Insulated Up To 1000 V, Which Ensures Stable Operation. The Set Is Supplied In A Fabric Bag With A Water-Repellent Layer. The Small Size Of The Set Allows You To Easily Carry It Without Special Equipment. Comfortable Handles Are Covered With A Special Non-Slip Layer, Which Ensures Comfortable Work. 1. Pliers 180 Mm - 1 Piece, Side Cutters 180Mm-1 Pcs, Long-Nose Pliers 160Mm-1 Pcs, Screwdrivers: 3X75x, 4X100, 5.5X125mm 3 Pcs, Screwdrivers: 1X100, 2X100-1 Pcs. Screwdriver-Indicator - 1 Pc. Bag-1 Pc., The Set Includes: Case, Test Screwdriver With Indicator 145Mm - 1 Pc, Slotted Screwdriver 6X100mm - 1 Pc, Phillips Screwdriver Ph2x100mm - 1 Pc, Screwdriver-Bit Holder 6X100mm - 1 Pc, High-Speed Steel Drill 4,5,6,8Mm - 3 Pcs, Brick Drill 5,6,8,10Mm - 3 Pcs, Wood Drill 4,5,6,8Mm - 3 Pcs, Mounting Knife 18Mm - 1 Pc, Ruler Level 210Mm - 1 Pc, Plastic Box For Accessories - 1 Pc, Adjustable Wrench 200Mm - 1 Pc, Set Of Bits - 11 Pcs, Combined Pliers -175Mm-1Pc, Hammer-Nail Puller -1Pc, Measuring Tape 3X19mm-1Pc, Electrical Tape 10M-1Pc, Drill-Screwdriver 230V/550W 0-3000Rpm-1Pc, Additional Handle And Key For Drill-2Pcs, High Voltage Indicator Uvn Is Used By Electricians To Check The Presence Or Absence Of Current In Overhead Power Lines And Other Installations With Industrial Frequency Currents, The Dielectric Mat Is Intended As An Additional Means Of Protection In Electrical Installations Of All Classes. Test Voltage Is 20 Kv Alternating Current With A Frequency Of 50 Hz, The Permissible Maximum Leakage Current Density Is Not More Than 160 Ma-M2, The Electrical Density Of Rubber For The Carpet Is Not Less Than 10 Kv-Mm. Size: 75X75 Cm. Shelf Life Is 3 Years., Stripper, Pliers For Stripping And Stripping Wires. The Multifunctional Stripper Is Equipped With Two Pairs Of Jaws With Blades.