Request For Quotation Purchasing Welding Products

Gloves With Thick Split Leather Lining For Welders. Leg Length 35 Cm, Rolling Air Jack 3 Tons. Mechanism Type: Pneumatic. Jack Design: Rolling. Load Capacity: 3.0 T. Pickup Height: 150.0 Mm. Lifting Height: 400.0 Mm. Material: Metal, Rubber. Color: Red. Additional Information: Pneumatic Jack 3 Tons. Air Jack 3 Tons., Radiator For Gazelle: The Radiator Is Part Of The Engine Cooling System Of The Gazelle Car, Which Is Designed To Cool Antifreeze (Coolant) And Maintain Optimal Engine Temperature., Welding Hammer Handle Length, Mm 250, Striker Weight, G. 300, No Striker With Magnet, Handle Material Metal, Package Length 26.5, Package Height 3.7, Package Width 12.5, Package Volume, Cu. Dm 1.226, Weight, G. 300 The Hammer Is Designed To Control The Seam When Working With Welding, Removing Slag And Metal Splashes. On One Side Of The Product There Is A Chisel, And On The Other There Is A Sharp Sting. The Tool Has A Spring Design To Soften Recoil During Impact, Danekerleu Ustagyshy: No Ratings Kuata 800 Ampere Deyingi Danekerleu Ustaghymyz Danekerleu Kezinde Electrode Berik Zhane Senіmdі Kosyludy Kamtamasyz Edi. Burners Materialdardan Zhasalgan, Ol Turaқty Current Berudi Qamtamasyz Edі Zhane Qyzyp Ketu Kaupіn Azaytady. Ergonomic Design And Design Ensures That You Will Not Be Able To Use The Ergonomic Design. Kasіbi Dәnekerleushiler Men Өnerkәsіptіk Kasіporyndar Ushіn Tamasha Tandau., Electrode Diameter (Mm): 3, Length (Mm): 300, Welding Current (A): 40-80, Position Of Seams During Welding: Ra, Pb, Rs, Pf, Pg, Pe, Pd, Welding Mode: Welding Is Carried Out With Direct Current Of Any Polarity (Recommended Reverse, “+” On The Electrode) Or Alternating Current From A Transformer With Open Circuit Voltage Not Less Than 50 V., Purpose: For Welding Structural And Low-Alloy Steels. Mainly Used For Manual Arc Welding Of Supporting (Load-Bearing) Structures Made Of Low-Carbon And Low-Alloy Steel Of Normal Strength, Such As Q235 (St.3), 09Mnv (09Gf), 09Mn2 (09G2), Weight (Kg): 5.0, Welder Mask: Filter Size: 100 X 90 Mm., Increased Strength. Heat-Resistant Filter. Optical Class 1. The Housing Is Made Of Special Non-Flammable Plastic. Easy And Quick Replacement Of Filter Cover Glass And Substrate. Adjustment Of The Tilt Of The Shield And Distance To The Face. Smooth Step-By-Step Adjustment Of The Headband To Fit The Head Size, 54 – 62 Cm. The Welder’S Mask Is Designed To Individually Protect The Welder’S Face And Eyes From Bright Light, Ultraviolet And Infrared Radiation, Splashes Of Molten Metal And Sparks When Performing Welding Work, Cutting And Soldering Metal., Welding Cable. O Number Of Cores - 1, Core Material - Copper, Raek-2844410, Tpzh Cross-Section - 35. Interpretation Of The Cgtp Cable Kg - Flexible Cable Tp - Insulation And Sheath Made Of Thermoplastic Elastomer Structural Elements Cgtp Cable: Conducting Cores - Copper, Round Shape, Class 5. Insulation - Thermoplastic Elastomer. Twisting - Insulated Cores Twisted To Fill The Free Space Between The Cores. The Shell Is Made Of Thermoplastic Elastomer In Black Or Blue. Scope Of Application Kgtp Cable: The Cables Are Intended For Connecting Mobile Mechanisms To Electrical Networks For A Rated Alternating Voltage Of 660 V, Frequency Up To 400 Hz, Or For A Constant Rated Voltage Of 1000 V. Technical Parameters Of The Kgtp Cable: Climatic Version Of The Cables - Hl, Placement Category 1,2,3 According To Gost 15150-69. The Cables Are Resistant To: - The Effects Of Elevated Ambient Temperatures Up To 50? C - To The Effects Of Low Ambient Temperatures Not Lower Than 60? C - To A Change In Ambient Temperature From Minus 60 To Plus 50? C - To The Effects Of Solar Radiation. The Bending Radius Of Cables During Installation And Operation Is At Least 8 Cable Diameters. Tensile Forces On The Cable Should Be No More Than 19.6 N (2.0 Kgf) Per 1 Mm² Of The Total Cross-Section Of All Conductors. Long-Term Permissible Temperature On Conductive Conductors Conductors Should Not Exceed Plus 75°C. Fire Hazard Class According To Npb 248-97 - O2.7.2.4. Construction Length Is Set When Ordering. Cable Service Life - At Least 4 Years, Electrode Diameter (Mm): 2, Length (Mm): 300, Welding Current (A): 40-80, Position Of Seams During Welding: Ra, Pb, Rs, Pf, Pg, Pe, Pd, Welding Mode: Welding Is Carried Out With Direct Current Of Any Polarity (Recommended Reverse, “+” On The Electrode) Or Alternating Current From A Transformer With Open Circuit Voltage Not Less Than 50 V., Purpose: For Welding Structural And Low-Alloy Steels. Mainly Used For Manual Arc Welding Of Supporting (Load-Bearing) Structures Made Of Low-Carbon And Low-Alloy Steel Of Normal Strength, Such As Q235 (St.3), 09Mnv (09Gf), 09Mn2 (09G2), Weight (Kg): 5.0