Location Of Engineering Services: Execution Of Template: It Will Be Measured By The Leased Work Area, Measured Between The Foundation Axes And Adding 0.50 M, From The Axis, To The External Side (M). The Item Pays For The Supply Of 3 X 3 Pine Or Cedrinho Bridges, 1 X 12 Pine Boards, Galvanized Wire, Including Accessory Materials And The Labor Required For Complete Rental Services In Building Works, Including: Location Of Piles, Main Axes, Walls, Etc., Manual Excavation Of Trench In 1St And 2Nd Category Soil, Depth Of Up To 2.00M: It Will Be Measured By The Excavated Volume, Considering An Increase For Each Side, In The Horizontal Plane, In Relation To The Dimensions Of Each Piece, Of 20 Cm (M). The Item Pays For The Provision Of The Labor Required For Manual Excavation In Soil Of 1 And 2 Categories In Ditches Or Pits Up To 2.00 M Deep, Wooden Shed, Cemented Floor And Corrugated Fiber Cement Tile Roof: It Will Be Measured By The Projection Area Of The Temporary Construction Roof Carried Out, With A Sketch Analyzed And Previously Approved By Inspection. (M) The Item Pays For The Supply Of Materials And Labor Necessary For The Execution Of Temporary Construction In Wood Intended For The Office And/Or Construction Warehouse, Consisting Of: Internal Floor And External Sidewalk In Machined Concrete, Fck 20 Mpa, Doors And Windows In Plasticized Plywood Sheet Of At Least 6 Mm Thickness, And/Or Resin Plywood With Waterproofing Sealer And Textured Paint Application, Windows With 3 Or 4Mm Fancy Glass, Door With Chrome-Plated Brass Hinges And Chrome-Plated Mortise Lock And With Georges-Type Core, Structure, Support For Roofing And Bracing In Bridges And Pine Or Cedrinho Boards And Framing. Immunized Eucalyptus Roof, Roof With Fibercement Tile, Corrugated Profile Of At Least 5 Mm Thickness, Electrical Installation And Acrylic Painting, Accessory Materials For Total Execution Of The Temporary Construction, In Accordance With Regulatory Standards. Must Obey No. 18 (Living Areas). It Also Pays For Maintenance During The Entire Period Of The Work And The Complete Demobilization Of This Shed., Supply And Placement Of Engineering Services Sign In Galvanized Sheet (3.00 (Un). The Item Pays For Construction Plates That Must Be Made Of 0.26 Galvanized Sheet. The Plates Will Be Fixed With 540 Rivets And 3/8 Screws, In A Metallic Structure With A Stiffened U 2 Beam And 20X20 Metalon. The Support For Installation Must Be Made Of Autoclaved Eucalyptus. The Plates Will Be Painted On The Front And Back With An Anti-Corrosive Coating And Automotive Paint. Format: 3.00 X 1.50M. The Size Of The Sign Is Defined Depending On The Location Of Its Installation And/Or The Value Of The Services Above R$ 30,000.00, Complying With The Proportion Of 6.00 X 3.00 M And The Visual Identity Manual Of The Government Of Minas. 0.5Mm, With A Module Size Of (300X220)Cm, With Reuse, Including Spike And Fixing: It Will Be Measured Per Area Of Siding Executed, Previously Approved By The Inspection Department (M). The Item Pays For The Supply Of Materials, Accessories For Fixing And The Labor Required To Create Fixed Siding On Galvanized Steel Tiles, Trapezoidal Type C
