Gostr 58885— 2020 Magnetic Telescopic Grip: Tool Length 20 Cm Telescopic Length 80 Cm The Diameter Of The Steel Tip Body Is 17 Mm. The Outer Diameter Of The Magnetic Ring Of The Tip Is 14 Mm Telescopic Handle Anti-Slip Coating. Contact Person Sharipov M.S. Tel: +77001089041, Gostr 58719—2019 Calibration Device For Nordberg Wheel Alignment Stands (Needed Specifically For Nordberg Stands In The Same Way As The Nordberg Stand Is Installed) C80x#Calibrator A Calibration Device Is A Special Tool For Calibrating And Checking The Accuracy Of Wheel Alignment Stands. Suitable For All Models Of Nordberg Wheel Alignment Stands With 3D Technology, As Well As Cargo Stands. Used For: Stand Calibration, Allowing You To Fine-Tune The Stand Sensors For Correct And Reliable Wheel Alignment Measurements Checking The Accuracy Of The Stands Readings By Comparing Its Measurements With Reference Values Diagnostics Of Faults, Identifying Irregularities In The Operation Of Sensors And Components. Dimensions (Mm) 1920 X 220 X 460 Total Weight With Packaging - 17 Kg Contact Person Sharipov M.S. Tel: +77001089041, Gostr 53165 2020 Battery 19.5/17.9 Euro 60Ah 540A 60 Characteristics Of The 6St 60 Battery Number Of Batteries Included In The Battery - 6 (First Digit Of Marking) Type - Starter Battery Rated Voltage - 12 V Battery Capacity - 60 Ah Inrush (Starting) Current Value: From 480 To 600 A Polarity: In Most Cases Reverse, But Direct Polarity Is Also Found. The Main Dimensions Of The Battery Are 242X175x190 Mm Weight Of Battery 6St-60 - 14-16 Kg (With Electrolyte) Contact Person Sharipov M.S. Tel: +77001089041, Gost Iso 1703-2015 Impact Screwdriver Impact Screwdriver With Rubber Protector. The Screwdriver Drive Is Made Of Chrome-Molybdenum Steel. Bit Inserts Are Made Of S2 Steel. Impact Screwdriver 1/2Dr With 1/2 Hexagon, With A Set Of Bits Of 17 Pcs. In A Plastic Or Metal Case, -Bit Insert Not Less Than L=36 Mm, Contact Person Sharipov M.S. Tel: +77001089041, Gost 882-75 Set Of Plate Probes: A Set Of Measuring Plates Of Different Thicknesses In A Metal Case. Measuring Probes With Thickness From 0.02 To 1 Mm 0.02; 0.03; 0.04; 0.05; 0.06; 0.07; 0.08; 0.09; 0.10; 0.15; 0.20; 0.25; 0.30; 0.40; 0.50; 0.75; 1.00 Mm Dimensions Of Steel Probes 10 X 100 Mm The Length Of The Probe Set Is No More Than 102 Mm Contact Person Sharipov M.S. Tel: +77001089041
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
