Tenders Are Invited For Road Construction Works – Renovation Of Alma Street

Road Construction Works – Renovation Of Alma Street. Planned Quantities: Cutting Of Existing Pavement: 1770 M Grinding Off The Top Layer Of Asphalt Pavements: 49185 M3 Demolition Of Curbs Of Any Material: 2280 M Preparation Of Bituminous Pavement Of Other Public Roads, Preparation Of Rolled Asphalt Binding Layer: 1440 M3 Preparation Of Raised Curb: 2342 M Preparation Of Recessed Curb Or Running Line: 401M Cleaning Of The Existing Rainwater Channel: 2135M Construction Of A Square Floor Plan Drainage Manhole: 160 Pcs Cast Iron Manhole Covers Dn 500-600: 150 Pcs During The Planned Renovation, The Existing Asphalt Pavement Will Be Renovated/Widened, The Breaking Points Of The Pedestrian Walkway Will Be Eliminated, And Stormwater Drainage Will Be Modernized. The Length Of The Road Affected By The Investment Is 1.19 Km. The Variable Width Of The Development Section Will Be Created On A Uniform 7.50 Meter Wide Pavement, Due To The Open Cycle Lane, Of Which The Width Of The Cycle Lane Is 1.25 To 1.25 M On Both Sides. At The Planning Stage, There Are 3 Pairs Of Bus Stops, The Platforms Of Which Will Be Standardized With The Same Paving Stones As The Existing Ones. At The End Of The Design Phase, There Is A Bus Bay That Will Need To Be Rebuilt Due To Road Widening. In The Case Of Pedestrian And Bicycle Path Connections, It Is Necessary To Build A Row Of Curbs Recessed In Its Width, In This Case, The Recess Of The Prominent Curb Line Must Be Built 1-1 Meter Long On Both Sides. Tactile Signs Will Be Placed In Pedestrian Crossings And Sidewalk Junctions - At Sidewalk Junctions, Only A Warning Strip Will Be Built Across The Entire Width Of The Sidewalk, With A 60 Cm Step Width. The Existing Storm Drain Along The Planning Stage And The Connecting Connections Must Be Cleaned Within The Framework Of The Investment! Detailed And Itemized Quantities And Detailed Technical Parameters, As Well As The Details Of The Task To Be Performed By The Winning Bidder, Its Detailed Characteristics, And The Detailed Professional Requirements Are Contained In The Public Procurement Document. The Bidder Draws The Attention Of T. Bidders To The Fact That If The Invitation Or The Documentation Made Available Contain A Reference To A Thing, Process, Activity, Patent Or Trademark Of A Specific Make, Origin, Type, The Designation Was Made Only In Order To Clearly Define The Nature Of The Object, And Whether It Is Included Next To The Designation Or Not, The Bidder - The Kbt. 321/2015 Referred To In Paragraph (4) Of § 58. (X.30.) Based On Paragraph (3) Of § 46 Of Government Decree - Accepts Equivalent Offers. 321/2015 Regarding The Verification Of Equivalence After The Result Announcement. (X.30.) Paragraphs (4)-(6) Of § 46 Of The Government Decree Are Governing.