Request For Quotation Purchase Of Steel And Cast Iron Valves

Cast Iron Parallel Gate Valve With Rising Spindle 30X6br Dn 500Mm, Pn 16, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam. Connection To The Pipeline: Flange. Working Environment Temperature: 225°C. Valve Tightness Class D According To Gost 9544-2015. Material Of Body, Cover, Wedge: Gray Cast Iron Sch 20 Gost 1412-85. Spindle Material: Steel 20Х13. Threaded Bushing, Seal In The Valve: Brass Ls 59-1 Gost 15527-2004. Bearing: Thrust Ball. Gasket: Trg. Construction Length: 500Mm. Weight: Not Less Than 450 Kg. Distinctive Coloring: Red Stripe On The Flywheel. A Passport Is Required For Each Valve Supplied Separately. The Passport Must Contain The Serial Number Of The Product, Date Of Manufacture, Quality Control Marks, And Seals Of The Manufacturer (Original). Service Life Of At Least 10 Years. Average Time Between Failures Is At Least 400 Cycles. Replacement Of A Defective Product Within 10 Days From Receipt Of The Complaint. St Rk 2592-2014, Cast Iron Parallel Gate Valve With Rising Spindle 30X6br Dn 150Mm, Pn 16, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam. Connection To The Pipeline: Flange. Working Environment Temperature: 225°C. Valve Tightness Class D According To Gost 9544-2015. Material Of Body, Cover, Wedge: Gray Cast Iron Sch 20 Gost 1412-85. Spindle Material: Steel 20Х13. Threaded Bushing, Seal In The Valve: Brass Ls 59-1 Gost 15527-2004. Bearing: Thrust Ball. Gasket: Trg. Construction Length: 280Mm. Weight: Not Less Than 58 Kg. Distinctive Coloring: Red Stripe On The Flywheel. A Passport Is Required For Each Valve Supplied Separately. The Passport Must Contain The Serial Number Of The Product, Date Of Manufacture, Quality Control Marks, And Seals Of The Manufacturer (Original). Service Life Of At Least 10 Years. Average Time Between Failures Is At Least 400 Cycles. Replacement Of A Defective Product Within 10 Days From Receipt Of The Complaint. St Rk 2592-2014, Cast Iron Parallel Gate Valve With Rising Spindle 30X6br Dn 400Mm, Pn 10, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam. Connection To The Pipeline: Flange. Working Environment Temperature: 225°C. Valve Tightness Class D According To Gost 9544-2015. Material Of Body, Cover, Wedge: Gray Cast Iron Sch 20 Gost 1412-85. Spindle Material: Steel 20Х13. Threaded Bushing, Seal In The Valve: Brass Ls 59-1 Gost 15527-2004. Bearing: Thrust Ball. Gasket: Trg. Construction Length: 400Mm. Weight: Not Less Than 412 Kg. Distinctive Coloring: Red Stripe On The Flywheel. A Passport Is Required For Each Valve Supplied Separately. The Passport Must Contain The Serial Number Of The Product, Date Of Manufacture, Quality Control Marks, And Seals Of The Manufacturer (Original). Service Life Of At Least 10 Years. Average Time Between Failures Is At Least 400 Cycles. Replacement Of A Defective Product Within 10 Days From Receipt Of The Complaint. St Rk 2592-2014, Cast Iron Parallel Gate Valve With Rising Spindle 30X6br Dn 200Mm, Pn 16, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam. Connection To The Pipeline: Flange. Working Environment Temperature: 225°C. Valve Tightness Class D According To Gost 9544-2015. Material Of Body, Cover, Wedge: Gray Cast Iron Sch 20 Gost 1412-85. Spindle Material: Steel 20Х13. Threaded Bushing, Seal In The Valve: Brass Ls 59-1 Gost 15527-2004. Bearing: Thrust Ball. Gasket: Trg. Construction Length: 330Mm. Weight: Not Less Than 99 Kg. Distinctive Coloring: Red Stripe On The Flywheel. A Passport Is Required For Each Valve Supplied Separately. The Passport Must Contain The Serial Number Of The Product, Date Of Manufacture, Quality Control Marks, And Seals Of The Manufacturer (Original). Service Life Of At Least 10 Years. Average Time Between Failures Is At Least 400 Cycles. Replacement Of A Defective Product Within 10 Days From Receipt Of The Complaint. St Rk 2592-2014, Cast Iron Parallel Gate Valve With Rising Spindle 30X6br Dn 80Mm, Pn 16, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam. Connection To The Pipeline: Flange. Working Environment Temperature: 225°C. Valve Tightness Class D According To Gost 9544-2015. Material Of Body, Cover, Wedge: Gray Cast Iron Sch 20 Gost 1412-85. Spindle Material: Steel 20Х13. Threaded Bushing, Seal In The Valve: Brass Ls 59-1 Gost 15527-2004. Bearing: Thrust Ball. Gasket: Trg. Construction Length: 210Mm. Weight: Not Less Than 19 Kg. Distinctive Coloring: Red Stripe On The Flywheel. A Passport Is Required For Each Valve Supplied Separately. The Passport Must Contain The Serial Number Of The Product, Date Of Manufacture, Quality Control Marks, And Seals Of The Manufacturer (Original). Service Life Of At Least 10 Years. Average Time Between Failures Is At Least 400 Cycles. Replacement Of A Defective Product Within 10 Days From Receipt Of The Complaint. St Rk St Rk 2592-2014, Gate Valve 30S907 Nzh Du 400 With Electric Drive. Gost 9698-86. Working Medium: Water, Steam, Oil, Materials Used In The Valve Are Corrosion-Resistant. Working Environment Temperature: From −40°С To +425°С. Operating Conditions: U1. Minimum Ambient Temperature: −40°С Material Design Of The Valve 30S964nzh. 1. Housing: Steel 25L. 2. Cover: Steel 25L. 3. Wedge (Discs): Steel 25L. 4. Spindle: 20Х13. 5. Spindle Nut: Brass Ls59-1. 6. Nut: Carbon Steel Gost 1050-88, Strength Class Not Lower Than 5 According To Gost 1759.5-87. 7. Stud, Bolt: Carbon Steel Gost 1050-88, Strength Class Not Lower Than 5.6 According To Gost 1759.5-87. 8. Hinged Bolt: Steel 35. 9. Seal Between The Body And The Cover (Gasket, Ring): Paronite, Trg. 10. Oil Seal Packing: Agi, Trg. 11. Bearing: Thrust Ball. 12. Surfacing On The Ring In The Body: 07Х25н13, 08Х21н10г6. 13. Surfacing On A Wedge: 13Х25т, 10Х17т, Analogue Of Z94oh -16C, Z941h-25 Do Not Offer. The Supplier Categorically Does Not Allow The Supply Of: Equipment With Existing Corrosion And Rust, Repaired, Refurbished, Or Used. It Is Not Permissible To Apply Paint On Internal Surfaces (Pipes, Seats, Wedges) And Shut-Off Valve Components. The Following Data Must Be Displayed On The Valve Body: Trademark Of The Manufacturer, Dn (Mm), Pn (Kgf/Cm2), Body Material, Brand (Designation), Serial Number. Set Of Shipping Documents: 1) Passport With A Detailed Drawing, For Each Supplied Valve Separately. The Passport Must Contain Quality Control Marks And Manufacturers Seals (Original). If The Equipment Is Foreign-Made, The Passport Will Be Factory-Made And Made In The Official Language Of The Country Of The Equipment Manufacturer. In This Case, The Supplier Must Provide A Notarized Translation Into Russian. 2) Operation Manual, 3) Certificate Of Origin Of Goods, 4) Declaration Of Conformity. St Rk Iso 6002-2010, Steel Wedge Valve With Extending Spindle 30S64nzh Dn 200Mm, Pn 25, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam, Liquid Non-Aggressive Petroleum Products, Liquid And Gaseous Ammonia, Natural Gas. Connection To The Pipeline: Flange. Working Environment Temperature: From -40°C To +425°C. Valve Tightness Class A According To Gost 9544-2015, Gost R 54808-2011. Material Of Body, Cover, Wedge: Steel 20L. Material Of Spindle, Saddles: Steel 20Х13. Bearing: Thrust Ball. Gasket: Trg. Stud, Bolt, Eye Bolt: Steel 35. Face-To-Face Length: 400Mm. Weight: Not Less Than 140 Kg. The Supplied Equipment Meets The Requirements Of Gost 5762-2002, Gost R 55511-2013, Gost 34610-2019. The Supplier Categorically Does Not Allow The Supply Of: Equipment With Existing Corrosion And Rust, Repaired, Refurbished, Or Used. It Is Not Permissible To Apply Paint On Internal Surfaces (Pipes, Seats, Wedges) And Shut-Off Valve Components. The Internal Surfaces Of The Shut-Off Valves Will Necessarily Be Treated With An Anti-Corrosion Coating. The Through-Holes Of The Shut-Off Valves Will Be Plugged With Plastic Plugs. The Following Data Must Be Displayed On The Valve Body: Trademark Of The Manufacturer, Dn (Mm), Pn (Kgf/Cm2), Body Material, Brand (Designation), Serial Number. This Information Will Be Duplicated On The Nameplate (Gost 4666-2015). Set Of Shipping Documents: 1) Passport With A Detailed Drawing, For Each Supplied Valve Separately. The Passport Must Contain Quality Control Marks And Manufacturers Seals (Original). If The Equipment Is Foreign-Made, The Passport Will Be Factory-Made And Made In The Official Language Of The Country Of The Equipment Manufacturer. In This Case, The Supplier Must Provide A Notarized Translation Into Russian. 2) Operation Manual, 3) Certificate Of Origin Of Goods, 4) Declaration Of Conformity. St Rk Iso 6002-2010, Cast Iron Parallel Gate Valve With Rising Spindle 30X6br Dn 250Mm, Pn 16, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam. Connection To The Pipeline: Flange. Working Environment Temperature: 225°C. Valve Tightness Class D According To Gost 9544-2015. Material Of Body, Cover, Wedge: Gray Cast Iron Sch 20 Gost 1412-85. Spindle Material: Steel 20Х13. Threaded Bushing, Seal In The Valve: Brass Ls 59-1 Gost 15527-2004. Bearing: Thrust Ball. Gasket: Trg. Construction Length: 450Mm. Weight: Not Less Than 182 Kg. Distinctive Coloring: Red Stripe On The Flywheel. A Passport Is Required For Each Valve Supplied Separately. The Passport Must Contain The Serial Number Of The Product, Date Of Manufacture, Quality Control Marks, And Seals Of The Manufacturer (Original). Service Life Of At Least 10 Years. Average Time Between Failures Is At Least 400 Cycles. Replacement Of A Defective Product Within 10 Days From Receipt Of The Complaint. St Rk 2592-2014, Cast Iron Parallel Gate Valve With Rising Spindle 30X6br Dn 100Mm, Pn 16, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam. Connection To The Pipeline: Flange. Working Environment Temperature: 225°C. Valve Tightness Class D According To Gost 9544-2015. Material Of Body, Cover, Wedge: Gray Cast Iron Sch 20 Gost 1412-85. Spindle Material: Steel 20Х13. Threaded Bushing, Seal In The Valve: Brass Ls 59-1 Gost 15527-2004. Bearing: Thrust Ball. Gasket: Trg. Construction Length: 230Mm. Weight: Not Less Than 30.5 Kg. Distinctive Coloring: Red Stripe On The Flywheel. A Passport Is Required For Each Valve Supplied Separately. The Passport Must Contain The Serial Number Of The Product, Date Of Manufacture, Quality Control Marks, And Seals Of The Manufacturer (Original). Service Life Of At Least 10 Years. Average Time Between Failures Is At Least 400 Cycles. Replacement Of A Defective Product Within 10 Days From Receipt Of The Complaint. St Rk 2592-2014, Steel Wedge Valve With Extending Spindle 30S64nzh Dn 150Mm, Pn 25, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam, Liquid Non-Aggressive Petroleum Products, Liquid And Gaseous Ammonia, Natural Gas. Connection To The Pipeline: Flange. Working Environment Temperature: From -40°C To +425°C. Valve Tightness Class A According To Gost 9544-2015, Gost R 54808-2011. Material Of Body, Cover, Wedge: Steel 20L. Material Of Spindle, Saddles: Steel 20Х13. Bearing: Thrust Ball. Gasket: Trg. Stud, Bolt, Eye Bolt: Steel 35. Face-To-Face Length: 350Mm. Weight: Not Less Than 86 Kg. The Supplied Equipment Meets The Requirements Of Gost 5762-2002, Gost R 55511-2013, Gost 34610-2019. The Supplier Categorically Does Not Allow The Supply Of: Equipment With Existing Corrosion And Rust, Repaired, Refurbished, Or Used. It Is Not Permissible To Apply Paint On Internal Surfaces (Pipes, Seats, Wedges) And Shut-Off Valve Components. The Internal Surfaces Of The Shut-Off Valves Will Necessarily Be Treated With An Anti-Corrosion Coating. The Through-Holes Of The Shut-Off Valves Will Be Plugged With Plastic Plugs. The Following Data Must Be Displayed On The Valve Body: Trademark Of The Manufacturer, Dn (Mm), Pn (Kgf/Cm2), Body Material, Brand (Designation), Serial Number. This Information Will Be Duplicated On The Nameplate (Gost 4666-2015). Set Of Shipping Documents: 1) Passport With A Detailed Drawing, For Each Supplied Valve Separately. The Passport Must Contain Quality Control Marks And Manufacturers Seals (Original). If The Equipment Is Foreign-Made, The Passport Will Be Factory-Made And Made In The Official Language Of The Country Of The Equipment Manufacturer. In This Case, The Supplier Must Provide A Notarized Translation Into Russian. 2) Operation Manual, 3) Certificate Of Origin Of Goods, 4) Declaration Of Conformity. St Rk Iso 6002-2010, Steel Wedge Valve With Extending Spindle 30S64nzh Dn 80Mm, Pn 25, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam, Liquid Non-Aggressive Petroleum Products, Liquid And Gaseous Ammonia, Natural Gas. Connection To The Pipeline: Flange. Working Environment Temperature: From -40°C To +425°C. Valve Tightness Class A According To Gost 9544-2015, Gost R 54808-2011. Material Of Body, Cover, Wedge: Steel 20L. Material Of Spindle, Saddles: Steel 20Х13. Bearing: Thrust Ball. Gasket: Trg. Stud, Bolt, Eye Bolt: Steel 35. Face-To-Face Length: 280Mm. Weight: Not Less Than 33 Kg. The Supplied Equipment Meets The Requirements Of Gost 5762-2002, Gost R 55511-2013, Gost 34610-2019. The Supplier Categorically Does Not Allow The Supply Of: Equipment With Existing Corrosion And Rust, Repaired, Refurbished, Or Used. It Is Not Permissible To Apply Paint On Internal Surfaces (Pipes, Seats, Wedges) And Shut-Off Valve Components. The Internal Surfaces Of The Shut-Off Valves Will Necessarily Be Treated With An Anti-Corrosion Coating. The Through-Holes Of The Shut-Off Valves Will Be Plugged With Plastic Plugs. The Following Data Must Be Displayed On The Valve Body: Trademark Of The Manufacturer, Dn (Mm), Pn (Kgf/Cm2), Body Material, Brand (Designation), Serial Number. This Information Will Be Duplicated On The Nameplate (Gost 4666-2015). Set Of Shipping Documents: 1) Passport With A Detailed Drawing, For Each Supplied Valve Separately. The Passport Must Contain Quality Control Marks And Manufacturers Seals (Original). If The Equipment Is Foreign-Made, The Passport Will Be Factory-Made And Made In The Official Language Of The Country Of The Equipment Manufacturer. In This Case, The Supplier Must Provide A Notarized Translation Into Russian. 2) Operation Manual, 3) Certificate Of Origin Of Goods, 4) Declaration Of Conformity. St Rk Iso 6002-2010