Tenders Are Invited For Reconstruction Of The Municipal Road With The Construction Of A Sidewalk Along The Street. Młyńska In Łowicz

The Subject Of This Procedure Is The Implementation Of An Investment Entitled: Reconstruction Of A Municipal Road In The Scope Of Construction Of A Sidewalk Along Młyńska Street In Łowicz. The Scope Of The Order Includes: 1) Construction Of A Sidewalk Along Municipal Road No. 115540E, 2) Construction Of Additional Lighting Lamps That Will Illuminate Pedestrian Crossings, 3) Replacement Of Existing Street Lighting Fixtures, 4) Cutting Down Of Conflicting Trees And Replacement Plantings; 5) Introduction Of Permanent Organization Traffic. Characteristic Parameters Determining The Size Of The Facility Or The Scope Of Road Construction Works: 1) Technical Parameters Of The Designed Road System: A) Investment Length: 264.42 M, B) Sidewalk Width: 2.20 M, C) Frost Depth: Hz = 1.0 M Below Ground Level, D) Sidewalk Transverse Inclination: One-Sided 2% Directed Towards The Road, E) Rainwater Drainage: Surface Towards Road, 2) Types Of Surfaces Of Individual Elements: Pavement And Exit Surfaces: Concrete Cubes, 3) Structures Of Individual Elements In Accordance With The Description Below: Pavement: - Bevelless Concrete Cubes, Thickness 6Cm, - Cement Ballast - Sand Thickness. 3 Cm (1:4), - Foundation Made Of An Unbound Mixture Of 0/31.5 Gr. 10 Cm, - A Layer Of Improved Base Made Of A Cement-Bound Mixture C1.5/2 - 15 Cm - Soil Category G1. Characteristic Parameters Determining The Size Of The Facility Or The Scope Of Street Lighting Construction Works: 1) Existing Booms And Sodium Lighting Fixtures Mounted On Electricity Poles At Ul. Młyńska, At Ul. Szymanowskiego And Ul. Wieniawskiego Should Be Dismantled, 2) New Led Street Lighting Fixtures Should Be Installed On Electricity Poles, 3) Installation Of The Designed Lighting Poles. New Luminaires Should Be Installed On The Designed Lighting Poles To Illuminate Pedestrian Crossings, 4) Lighting With Dedicated Luminaires Is Designed For The Designed Pedestrian Crossings, 5) The Power Supply For The Designed Luminaires Should Be Made Using A Yakxs 4X25mm2 Cable, 6) Galvanized Tape Fezn 25X4.7 Should Be Placed Along The Cable, 7) The Designed Luminaires Should Be Mounted On The Arms Of The Designed Lighting Poles, Directly On The Designed Poles (Without A Boom) Or On The Designed Booms Of Existing Electricity Poles,8) Steel, Galvanized, Hexagonal Or Octagonal Poles Made Of At Least 4Mm Sheet Metal, Installation Of The Pole On Prefabricated Concrete Foundations,9) Road Lighting: Installation Of Booms On Electricity Poles, Suspension Height Of The Luminaire 8M, 1-Arm Booms (Boom Length ~ 1M),10) Lighting Of Pedestrian Crossings, Poles Steel, On Prefabricated Foundations, Luminaire Suspension Height 6 M, 1-Arm Booms (Reach Length ~ 1 M),11) Road Lighting Luminaires 40 W, Maximum Power Taking Into Account All Losses - 45W, Type Of Light Source - Led, Minimum Luminous Flux Of Led Panel - 4000Lm,12) Pedestrian Crossing Lighting Luminaires 46 W, Maximum Power Taking Into Account All Losses - 52W, Type Of Light Source - Le