Bids Are Invited For The Purpose Of This Tender Is To Register Prices For The Acquisition Of Materials Intended For The Construction Of A Passenger Shelter (Bus Stop) In The Municipality Of Lauro MüllerSc, In Accordance With The Requirements Contained In The Terms Of Reference.

Corrugated Metal Tile: Made From Galvalume Steel (Aluminum-Zinc Alloy, Min. 55% Aluminum), With High Resistance To Corrosion. Dimensions: Length Of 2.00 Meters And Approximate Total Width Of 1.10 Meters (Guarantee Useful Width According To Profile). Sheet Thickness: 0.50 Mm (Or 0.43 Mm For Lower Cost, But 0.50 Mm Is The Standard For Greater Durability). Natural Finish (Unpainted). Conforms To Technical Standards For Durability And Mechanical Resistance. Corrugated Metal Tile: Manufactured In Galvalume Steel (Aluminum-Zinc Alloy, 50Mm Is The Highest Durability Standard). Natural Finish (Unpainted). According To Technical Standards For Durability And Mechanical Resistance, Self-Drilling Screw: Hexagonal Head, Measurement 5.5Mm X 1 Inch, Made Of Zinc Plated Carbon Steel. Comes With Rubber/Epdm Sealing Washer For Watertight Sealing. Drill Tip Capable Of Drilling Metal Sheets Without The Need For Pre-Drilling. High Resistance To Corrosion.Self-Drilling Screw: Hexagonal Head, Made Of Zinc Plated Carbon Steel. Comes With Rubber/Epdm Sealing Washer For Watertight Sealing. Drill Tip Capable Of Drilling Metal Sheets Without The Need For Pre-Drilling. High Resistance To Corrosion., Carbon Steel Tube, Round Shape, Black Finish, Nominal Diameter Of 2.1/2 Inches (Two And A Half Inches), Wall Thickness Of 4.75 Mm (Four Millimeters And Seventy-Five Hundreds), Length Of 6.00 M (Six Meters). Material According To Standard Nbr 5590 Or Equivalent Astm A53. Carbon Steel Tube, 00 M (Six Meters). Material According To Standard Nbr 5590 Or Equivalent Astm A53., Carbon Steel Tube (Black, Without Additional Surface Treatment), Round Shape, With 2 Inches Of Nominal Diameter (Approximately 50.8 Mm Of External Diameter), Â2.00 Mm Wall Thickness, In Bars Of 6 Standard Length Meters. Carbon Steel Material Sae 1010/1020Âor Similar, According To Applicable Technical Standards, Asâabnt Nbr 6591Â(For Industrial Tubes) Orâabnt Nbr 5580 / Din 2440.Carbon Steel Tubeâ(Black, Asâabnt Nbr 6591Â(For Industrial Tubes) Orâabnt Nbr 5580 / Din 2440., Black Round Metal Tube: Outer Diameter Of 1 Inch Wall Thickness 2Mm Sheet, 6 Meter Bar. 15:53:06, 25/02/2026 - 15:53:49, Angle Bracket 2 90° Right Angle Between Flaps. Nominal Dimensions: Flaps: 2 Inches (Approximately 50.80 Mm). Angle Bracket 2 Length: 6 Meters (6,000 Mm). Manufacturing Standards: The Material Must Meet The Requirements Of T Standards