Request For Quotation Medical Products For Hospital

Intraocular Acrylic Hydrophilic Lens Pre-Installed Into The Implantation System Spherical Hydrophilic Lens Monofocal Spherical 6.0 Mm. Intraocular, Sterile, Hydrophilic, Biconvex, Acrylic, Pre-Installed, Designed For Surgical Implantation Into The Human Eyeball To Replace The Lens Of The Eye, With Absorption Of Uv Radiation. Main Lens Sizes: Overall Diameter: 12.50Mm Optics Size: 6.00Mm Moisture Content 26% Uv Protection - Based On Benzophenone Abbe 56 Refractive Index 1.46 A Constant: 118.6 Haptic Inclination Angle - 0 O Haptic Edge Design - Amon-Apple 360 O Advanced Square Edge Anterior Chamber Depth: 5.32 Support Element Style - Curved Loop With Anti-Bend Technology Lock And Roll Technology Lenses Are In 31 (± 1.0) Ml Sodium Chloride Solution With A Concentration Of 0.9% For Irrigation Spherical Range From -10D To +34D (Step 0.5-1D). Injector Type - Disposable Pre-Installed System Cut Size - Cartridge Tip 1.65Mm For Cut Smaller Than 2.2 Bevel Angle-45 O Introduction Of The Plunger Lens For One Hand, Acrylic Hydrophilic Intraocular Lens Pre-Installed In The Implantation System, Intraocular Acrylic Hydrophilic Lens Pre-Installed Into The Implantation System Toric Optics, Toric Hydrophilic Lens, Acrylic, Pre-Installed, Designed For Surgical Implantation Into The Human Eyeball For The Purpose Of Aberration-Free Correction Of Refraction And Correction Of Astigmatism. Main Lens Sizes: Overall Diameter: 12.50Mm Optics Size: 6.00Mm Moisture Content 26% Uv Protection - Based On Benzophenone Abbe 56 Refractive Index 1.46 A Constant: 118.6 Haptic Inclination Angle - 0 O Haptic Edge Design - Amon-Apple 360 O Advanced Square Edge Anterior Chamber Depth: 5.32 Asphericity - Rear Aspherical Aberration-Free Surface Support Element Style - Curved Loop With Anti-Bend Technology Lenses Are In 31 (± 1.0) Ml Sodium Chloride Solution With A Concentration Of 0.9% For Irrigation Range: Lenses - From +8D To +30D (0.5D Steps), Cylinders - From +1D To +6D (Step 0.5D) On Request: Lenses - From -9D To +34.5D (0.5D Increments), Cylinders - From +1D To +11D (Step 0.5D) Injector Type - Disposable Pre-Installed System Cut Size - Cartridge Tip 1.65Mm For Cut Smaller Than 2.2 Bevel Angle-45 O Introduction Of The Plunger Lens For One Hand