Lateral Movement Simulator Like Surfing - Made With Carbon Steel Tubes Measuring At Least 3 ½ X 3 Mm; 2 X 2 Mm; 1 ½ X 2 Mm; Drawn Carbon Steel Tube 2 X 5.54 Mm Schedule 80 (60.3 X 49.22 Mm); Carbon Steel Plates Of At Least 4.75 Mm; 3Mm; Steppers Made Of Stamped Carbon Steel Sheet Of At Least 2 Mm, With Rounded Corners, Stamped 2 Mm Carbon Steel Covers To Protect The Bearings, External Metal Covers. Uses Solid Shafts, With Double Bearings, Polyester Electrostatic Powder Painting, Mig Welding, Rubberized Finish. Allows The Use Of 2 (Two) Simultaneous Users And Offers Complete Security. Installation In Closed Or Outdoor Areas, Resistant To Weather Actions. Fixing The Device To The Ground Using A Parabolt Anchor Or A Flange Anchor. Product Identification Sticker, Muscles Exercised And Tips For Use And Functions Of The Device, Manufacturer Data And Contact For Technical Assistance. Height: 1220 Mm; Depth: 1020 Mm; Width: 715 Mm. Weight: 28.10 Kg. Proof Of Conformity The Winning Bidding Company Will Have A Maximum Period Of 3 (Three) Calendar Days To Prove That The Material Used In The Manufacturing Process Fully Meets The Established Technical Requirements. Proof Must Be Carried Out Through The Presentation Of Technical Test Reports And Respective Certificates, Issued By Competent Institutions Or Laboratories, As Detailed In The Following Items. Abnt Nbr 16.779/2019 - Permanent Equipment Installed For Free Access Outdoor Training. Safety Requirements And Test Methods. Abnt Nbr 17088:2023 - Corrosion Due To Exposure To Salt Mist - Test Methods Without Corrosion Products On The Base Metal, Classified As Grade Ri0, According To Standard Nbr Iso 4628-3. No Blistering Of The Paint Film, Classified As Grade D0/T0, According To Nbr 5841. Nbr 7399:2015 - Steel And Cast Iron Product Galvanized By Hot Dip - Verification Of Coating Thickness Using A Non-Destructive Process..., Walking Simulator (Double) - Manufactured With Carbon Steel Tubes Of At Least 2 ½ X 2Mm; 2 X 2 Mm; 1 ½ X 2 Mm; Drawn Carbon Steel Tube 2 X 5, 22 Mm); Carbon Steel Plates Of At Least 3 Mm; Steppers Made Of Stamped Carbon Steel Sheet Of At Least 2 Mm, Stamped 2 Mm Carbon Steel Covers To Protect The Bearings. Uses Solid Shafts, Mig Welding. Allows The Use Of 2 (Two) Simultaneous Users And Offers Complete Security. Installation In Closed Or Outdoor Areas, Resistant To Weather Actions. Fixing The Device To The Ground Using A Parabolt Anchor. Product Identification Sticker, Manufacturer Data And Contact For Technical Assistance. Height: 1150 Mm; Depth: 1750 Mm; Width: 1055 Mm. Weight: 58 Kg. Proof Of Conformity The Winning Bidding Company Will Have A Maximum Period Of 3 (Three) Calendar Days To Prove That The Material Used In The Manufacturing Process Fully Meets The Established Technical Requirements. Proof Must Be Carried Out Through The Presentation Of Technical Test Reports And Respective Certificates, In Accordance With Nbr 5841. Nbr 7399:2015 - Hot Dip Galvanized Steel And Cast Iron Product - Verification Of Coating Thickness Using A Non-Destructive Process - Test Method. Nbr 11003:2009 - According To Errata 1, Published On 04/27/2010 - Tests That Determine..., Individual Rowing Simulator - Manufactured With Carbon Steel Tubes
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
