Bids Are Invited For Manufacture And Installation Of Road And Public Places And Qr Code Stickers For The Urban Cleaning Division - Public Services Secretariat

Lot 1 - Production Of Identification Signs For Roads And Public Places, With Posts And Clamps. Being The Service Unit: A Set Of 2 Signs And A Post With Clamps Informational Content – ​​Both Signs Must Contain The Following Information On Both Sides: Postal Address Code: Name Of The Neighborhood. Qr Code (According To Law No. 9,946/2024); Typographic Specification: Hevéltica Ligth Font, In Upper Case For The Letters That Begin The Words Relating To The Type And Name(S) Of The Street And In Lower Case For Everything Else, Including Prepositions And Articles, Except In Specific Cases Where Foreign Spelling Dictates Otherwise. Height, Type And Name (S) 4.8 Cm – Upper Case. Numbering: 4.0 Cm; Zip Code And Neighborhood: 1.5 Cm. On The Right Side Measuring 7Cm Plate Materials – Galvanized Steel Sheet Plate, 0.95 Mm Thick, Longitudinally Scored On The Top And Bottom Edges To Prevent It From Flexing, With 2 (Two) Holes On Each Side Of The Plate For Fixing With Clamps, Electrostatic Painting In The Color Requested By The Public Services Department, Overlaid By The Information In Digital Printing With Reflective Material, The Delivery Deadline Should Be 15 Days. The Material Of The Plates Must Have A Guarantee Of 5 To 10 Years. Post Materials: Galvanized Iron Tube Post, 3 Mm Thick, 60.3 Mm Diameter, Post Height: 3 M, With 0.50 Cm Buried. With A Protective Cap On The Top To Prevent Water From Infiltrating. The Signs And Posts Must Be Made Up, In Whole Or In Part, Of Recycled, Non-Toxic, Biodegradable Material, In Accordance With Abnt Nbr – 15448-1 And 15448-2., Lot 1 - Installation Service Installation Of Identification Signs For Roads And Public Places With Posts For The Public Services Department. The Company Must, After Receiving The Service Order, In Accordance With The Needs Of The Contractor, Be Prepared With At Least 9 Employees In 3 Teams For Installation In Different Locations, Informed Of The Service Order Issued By The Urban Cleaning Division For The Provision Of Installation Service For The Units, With The Deadline For Service Being 5 Working Days, With Adequate Transport For The Tools, Signs, Posts And Labor. The Number Of Units To Be Installed May Be A Maximum Of 600 Units Per Month. With Two Plates Fixed To Each Support Post, At The Same Level With Two Aluminum Clamps On Each Plate. Payment Will Be Made Per Unit, With Each Unit Consisting Of Two Plates, A Fixing Post And Appropriate Clamps. The Signs And Posts Must Be Made Up, In Whole Or In Part, Of Lot 1 - Production And Installation Production And Installation Of Stickers With Qr Code Measuring 7Cm -Glossy Finish; -Thickness Of 100 Microns; -Lamination With Glossy Transparent Adhesive Film With A Thickness Of 80 Microns;, , Pre_121_25_-_Conf._E_Instalacao_De_Placas_De_Vias.Pdf