Igi. Cardan Shaft For Paz 32054 Bus. Minimum Driveline Length 2832 Mm. Maximum Length 2924 Mm. Working Stroke 92 Mm. The Length Of The Front Shaft To The Center Of The Promotional Pore (L1) Is From 1286 To 1351 Mm. The Length From The Center Of The Promopore To The Axis Of The Central Cross (L2) Is From 126 To 146 Mm. The Crosspiece Used (With A Grease Nipple; Fastening With Plates And Bolts), Or (With A Grease Nipple; Fastening With Retaining Rings). The Outer Diameter Of The Bearing Is 39 Mm, The Diameter Of The Crosspiece Tenon Is 25 Mm. The Distance At The Ends Of The Bearings Is 118 Mm, The Distance At The Ends Of The Studs Is 108 Mm. Support Used (A161 Mm, B162.5 Mm, C195 Mm, D33 Mm, E82 Mm, D14 Mm). Flange Used (Smooth, Square). Flange Connection 4 Holes (D) 14 Mm, Diameter At The Centers Of Opposite Holes 120 Mm, Collar Diameter (D2) 95 Mm, Collar Height 2.5 Mm, Rim (D) 148 Mm. Gost 33669-2015. Certificate.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
