Dual Walking Simulator For Two Simultaneous Users Horse Riding Simulator. Strengthens The Muscles Of The Lower And Upper Limbs And Expands Cardiorespiratory Capacity. Manufactured With Carbon Steel Tubes Measuring 2 1/2X2 Mm; 2X2mm; 11/2 X 2Mm; 1X 1.5Mm; Drawn Carbon Steel Tube 1 1/4 X 3.56 Mm Schedule 40 (42.3 X 35.18 Mm); Carbon Steel Sheets Of At Least 6.35 Mm; 4.75Mm; 3Mm; Seat Made From Printed Carbon Steel Sheet Measuring At Least 240 X 340 X 2 Mm, With Rounded Corners. It Uses Solid Axles, With Double Bearings, Electrostatic Polyester Powder Painting, Rubber Stops, External Metal Covers, Mig Welding, Rubberized Finish. Allows The Use Of 2 (Two) Simultaneous Users And Offers Total Security. Installation In Closed Or Outdoor Areas, Resistant To Climate Actions. Fixing The Device To The Ground Using A Parabolt Anchor. Product Identification Sticker, Exercised Muscles And Tips For Use And Functions Of The Device, Data., Double Horseback Riding Simulator In Stainless Steel, Made With Stainless Steel Tubes Of Minimum 2 1/2 X 2 Mm; 2 X 2 Mm; 1 1/2 X 3 Mm;1 1/2 X 1.50 Mm; 1 X 1.50Mm; Flat Bar Of Minimum 2 1/2 X 1/4; 3/16 X 1 1/4. Drawn Carbon Steel Tube 2 X 5.50 Mm Schedule 80 (60.30Mm X 49.22 Mm). Carbon Steel Sheets Of At Least 4.75 Mm For The Equipment Fixing Point And 2 Mm For The Printed Bench With Rounded Edges. Solid Pins Are Used, All Bearings (Double Bearings), Phosphate-Based Surface Treatment; Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Round Flexible Rubber Stops (53 Mm X 30 Mm), Parabout Anchor Of At Least 3/8 Internal Built-In Plug In Injected Plastic Minimum Design 2 With Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. 3M High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data, Height: 1100 Mm, Front: 1273 Mm, Side: 1200 Mm, Area: 10, 47 M2, Weight: 50, 5 Kg., Leg-Press Simulator Equipment 1520X425x2165 Mm Leg-Press Simulator Equipment Produced From Tubes And Stainless Steel Plates, In Dimensions Of 3 1/2, 2, 1, 3/4 And 3/16 With Minimum Thicknesses Of 2.00 Mm; 14, Making It Insensitive To Water Penetration; Using Solid And Machined Shafts Zinc Plated In Black. Dimensions: Height 1,520 Mm Width: 425 Mm Length: 2165 Mm Weight: 50 Kg, Vertical Double Wheel Simulator Device Vertical Double Wheel Simulator Device.Equipment Produced Made From Tubes And Sheets Made Of High-Resistance Stainless Steel, With Dimensions Of 3 1/2.00 Mm; Tubular Holes: Upper Ends, Making Them Impervious To Water Penetration; Using Solid And Machined Black Zinc-Plated Shafts, Double Shoulder Wheel In Stainless Steel - Capacity For Two Users Simultaneously To Perform The Exercise, Made With Main Tube Of 03. 1/2.X3, 00Mm, With Secondary Tubes Of 01.1/2.X2, 65Mm, 01.1/8. 90 Mm, Drawn Iron 01.1/2. Mig Type Welding, Surface Treatment, Electrostatic Powder Paint With Polyester Resistant To Weather, Climate Reaction, Stickers With Indication Of The Muscles, Fixing Base Made From Laser Cut Sheet Metal With A Minimum Dimension Of 0180 Mm In Diameter
