Tenders Are Invited For Stacking Machinery - Purchase Of A Wheel Loader

Stacking Machinery - Purchase Of A Wheel Loader. Sales Contract In The Subject Purchase Of A Wheeled Loader The Machines Production Date Is 2022 Or Later Diesel Operation Required Engine Power Minimum 115 Kw Operating Weight Of The Machine: 16,000 -17,000 Kg Automatic Central Greasing Equipment Required Boom Design: Split Required Min. 2500 Mm Horizontal Extension (Measured From Pivot Point) Min. 8500 Mm Hydraulic Pump Minimum Output Min. 230 L/Min Cabin With Roll-Over Protection Structure (Rops Or Equivalent) And Falling Object Protection Structure (Fops Or Equivalent Design) Necessary Road Traffic, Slow Vehicle Category Necessary Engine Emission Environmental Protection Standard: Stage V / Tier 5 Necessary Accessories, Adapters 1. New Hydraulic Quick Changer For Changing Adapters Warranty Period 12 Months 2. New Digging Bucket Equipped With Nails - 1 Pc Design Equipped With Nails Required Bucket Width Max. 1200 Mm Max. 1200 Mm Warranty Period 12 Months 3. New Rotator Universal Grasping Spoon, With Closed Cup - 1 Pc Spoon Capacity Min. 250 Liters Warranty Period 12 Months 4. New Rotary Crushing Shears / Multiprocessor - 1 Pc Suitable For Breaking Concrete And Cutting Steel Weight Of Crushing Shears Min. 1300 Kg Breaking Force (Measured At The End) Min. 45 Tons Warranty Period 12 Months 5. New Hydraulic Demolition Hammer - 1 Pc Demolition Hammer Weight Min. 900 Kg Supplied With 2 Demolition Pins Warranty Period 12 Months 6. New Hydraulically Driven Conical Log Splitter Adapter - 1 Cone Diameter Minimum Min. 75 Mm Cone Length Minimum Min. 280 Mm Warranty Period 12 Months 7. New Two-Cup Ladle, With Rotator, Nails - 1 Pc. Capacity Min. 600 Liters Warranty Period 12 Months The Machine Can Be New, Demonstration Piece Or Used, It Must Be In Excellent Technical And Aesthetic Condition, Suitable For Intended Use. In The Case Of A Used Machine, The Year Of Manufacture Of The Machine Offered By The Bidder Cannot Be Before 2022, And The Operating Hours Of The Machine Cannot Exceed 400 Operating Hours. Machine Accessories Must Be New. A New Accessory Is One That Has Not Been Used As A Demonstration Or Test Accessory, Neither In Hungary Nor Abroad, And Has Never Been Renovated. Relevant Provisions Primarily, But Not Exclusively: A) Act V Of 2013 On The Civil Code, A) Köhém Decree 5/1990 (Iv.12) On The Technical Inspection Of Road Vehicles, B) 6/1990. (Iv.12.) Köhém Decree On The Technical Conditions For Putting Road Vehicles Into Service And Keeping Them In Service. All Vehicle Parts, Accessories And Features Subject To The Approval Obligation Set/Referenced In The Decree Must Be Approved In Accordance With The Un-Ece Regulations. C) Act I Of 1988 On Road Transport Detailed Description In The Attached Documents.