Flux-Cored Wire E71t-Gs D-0.8Mm (5 Kg Coil D200) Is Used For Semi-Automatic Welding Without The Use Of A Protective Gas Environment Of Carbon And Low-Alloy Materials. (Raw Materials And Materials Ugv), Pass-Through Flanges D-200Mm 18820-20Dn 200 Gost -80 Pn10 (Raw Materials Ugv) 1St Quarter, Round Rubber Cords-30Mm 1-1S Gost 6467-79Round Rubber Cords-30Mm 1-1S Gost-6467-79 Are Designed To Ensure Tightness In Fixed (One-Piece) Connections At Pressures Of Working Media Up To 7.0 Mpa (70 Kgf/Cm2), As Well As To Protect Various Cavities From Dirt And Dust. Can Be Used In Any Systems, Mechanisms And Devices That Require Reliable Sealing And Sealing. (Raw Materials And Materials Ugv), A Motor Pump For Pumping Water, Equipped With A Four-Stroke Single-Cylinder Gasoline Engine, Centrifugal Self-Priming Type, With An Engine Displacement Of At Least 212 Cm³, A Nominal Rotation Speed Of At Least 3800 Rpm And A Maximum Capacity Of At Least 130 Liters Per Minute. The Product Is New, Unused, In Factory Configuration, With A Guarantee Of At Least 12 Months. (Raw Materials And Materials Ugv), Electrode Mp3-Ø3mm (Raw Materials And Materials Ugv) 1St Quarter, Aluminum Horizontal Blinds For Windows Width-120Cm Height-160Cm Color White (Raw Materials And Materials Ugv), Towing Rope With Loops With A Maximum Weight Of Up To 10,000 Kg. Length-4.5M, Width 100Mm (Raw Materials And Materials Ugv), Turning Cutter Through Passage Persistent T15 K6 (Raw Materials And Materials Ugv), Electrode Mp3-Ø2mm (Raw Materials Ugv) 1St Quarter, Lathe Cutting Cutter T15 K6 (Raw Materials And Materials Ugv), Threading Tool Set 110 Pieces - Metric Sizes From M2 To M18 From High-Strength Steel Gcr15. Threading Tool Set 110 Pieces - Metric Sizes From M2 To M18 From High-Strength Steel Gcr15 - Complete Set For Cutting And Re-Threading With A Set Of Dies For Internal And External Threads, Does Not Require Electricity, Metal Version, Includes A Durable Case For Storage. (Raw Materials And Materials Ugv), Turning Cutter T15 K6 (Raw Materials And Supplies Ugv), Angle Grinder (Grinder) For Processing Metal And Building Materials, With A Supply Voltage Of 220 V, A Rated Power Of At Least 2200 W. Disk Rotation Speed - No More Than 6600 Rpm. The Outer Diameter Of The Disk Is 230 Mm. The Product Is New, Not Used, In Factory Configuration, With A Guarantee Of At Least 12 Months. (Ugv), Bolt M16x70 With Nut (Raw Materials And Materials Ugv), A Gasoline Generator Designed To Generate Electrical Energy, With The Ability To Operate In Single-Phase And Three-Phase Networks. Network Parameters: Voltage 220/380 V, Frequency 50 Hz. Rated Power At A Voltage Of 380 V Is Not Less Than 7 Kw, Maximum Power At A Voltage Of 380 V Is Not Less Than 7 Kw. The Generator Is Intended For Use For Domestic And Industrial Purposes. The Product Is New, Unused, In Factory Configuration, With A Guarantee Of At Least 12 Months. (Ugv), Open-End Wrenches On The Blade 26 Items (6-32Mm) (Raw Materials And Materials Ugv), Bolt M22x190 With Nut (Raw Materials And Materials Ugv), Impact Wrench Ex-1000N-X2 (Case, Charger, Two 12V 4Ah Batteries. Socket Heads) 128V. Diameter: 10Mm. Maximum Idle Speed: 2600.0 Rpm. Maximum Torque: 1000.0 Nm. Power Consumption: 48.0 W. M8-M32. (Raw Materials And Materials Ugv), Pass-Through Flanges D-300Mm Pn10 Gost 12820-80 (Raw Materials And Materials Ugv), Auto Sealant In A 60 Gram Tube (Raw Materials And Materials Ugv)
