Suit With Fire-Resistant Impregnation.Jacket: Straight Silhouette, With A Central Right-Sided Fastener With Buttons With Catchers For Buttons. On The Back, Along The Seam Of The Yoke, There Are Two Ventilation Holes. The Sleeve Is Set-In, Under The Sleeves There Are Ventilation Holes. The Collar Is Turn-Down. To Ensure Maximum Protection, A Fire-Resistant Sop Tape Runs Along The Front Yoke. Sleeve Design Designed Taking Into Account The Characteristics Of The Welder’S Work. Trousers: Straight Silhouette, Fastened With Loops And Buttons In The Side Seams, With Belt Loops, With A Folding Front Part - Lapel, Pockets Located In The Side Seams. Back Halves With A Stitched Belt, With Darts At The Waist. There Are Ventilation Holes At The Top Of The Crotch Seams. Pockets. Jacket: Internal Chest Patch Pocket Made Of Calico; Lower Vertical Pockets. Trousers: Vertical Pockets In The Side Seams. Reinforcing Elements: Jacket - Shelves, Yokes, Sleeves Are Duplicated With Reinforcing Linings; Trousers - The Lining On The Front Halves Partially Runs Along The Side Seam From The Back Side, The Back Halves With Reinforcing Linings Along The Bottom And Along The Side And Crotch Seams, The Front Halves With Reinforcement Above The Crotch Along The Entire Length And Width Of The Front Halves. Signal Elements: Fire-Resistant Tape Sop Xm-6011 50 Mm. 54R-2Pcs, 56R-2Pcs, 58R-1Pc, 60R-1Pc.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
