Technical Specification For The Supply Of Belt-Disc Grinding Machine Belmash S353a. The Supplier Is Obliged To Supply A New, Unused Industrial Machine That Meets Safety And Quality Requirements, With A Set Of Factory Documentation And A Warranty Of At Least 12 Months. Electric Motor Type – Asynchronous, Power Consumption Not Less Than 1500 W, Operating Mode S1. Shaft Rotation Speed – 2980 Rpm. The Work Table And Base Are Steel. The Sanding Belt Used Is 1829 Mm Long, 50 Mm Wide, The Permissible Belt Length Range Is 1630–2248 Mm. The Tilt Angle Of The Working Part Is From –45° To +45°. Contact Roller With A Diameter Of 300 Mm, Material – Aluminum With Rubber Coating; Contouring Rollers With A Diameter Of 25 And 40 Mm. Drive Pulley – Aluminum. The Grain Size Of The Ribbons Included Is No Less Than 100, 180, 240 Grit. The Dimensions Of The Machine Are No More Than 1018X540x670 Mm, Net Weight Is About 75.7 Kg. Base With 10Mm Diameter Mounting Holes. Working Surface Height 400–500 Mm. The Length Of The Power Cord Is At Least 1.8 M. Power Supply Is A Standard Single-Phase Network. Contents: Machine Assembly, Guide, Contact Roller, Rotary Console With Rollers, Roller Mounting Bracket, 25 And 40 Mm Rollers, Protective Cover, Work Stop And Adjustable Bracket, Fastener Kit, Three Sanding Belts, Adjustable Frequency Converter, Operating Manual In Russian And Kazakh. Delivery – 1 Unit, In Original Packaging, With Completeness Checked Upon Delivery.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
