Bids Are Invited For Acquisition Of Temporary Traffic Signaling Items, To Be Used In Dry Law Operations

Reflective Barrel Type Signaling Cone, Traffic Channel, Stackable, In Orange Color With Protection Against Uv Rays, Total Height Of 116 Cm; Weight Between 7 And 8 Kg With Empty Tank; Fully Cylindrical Shape With A Minimum Diameter Of 40 Cm, On A Square Base With Rounded Corners Measuring 25 Cm In Height Orange, With Protection Against Uv Rays, Height Approx. 1.15 M Wide And Approx. From 0.62M; Weight Between 7 And 8 Kg, With Empty Reservoir, Horizontal Plastic Barrier, With Protection Against Uv Rays; Weight Between 13 And 14 Kg With Empty Tank; Dimensions: Length 1600 Mm (+/-20 Mm), Width 450 Mm (+/-10 Mm) And Height 750 Mm (+/-10 Mm). It Must Have An Internal Cavity Measuring 200 Mm In Height To Regulate Its Weight With Sand Or Water Bags. Its Flat Base Must Have 5 Shoes, Distributed Proportionally, For Better Fixation To The Ground And Passage Of Water Current, Avoiding Unintentional Displacements. The Barrier Must Be Made Up Of A Single Piece And Have An Overlapping Pin Interconnection System And Handles To Facilitate Transportation And Allow The Attachment Of A Light Signal, Made In The Piece Itself. The Structure Of The Tire Puncture Must Be Able To Withstand A High Load Rate Without Permanently Deforming And Be Treated Against The Weather. Portable Speed Bump, For Temporary Reduction Of Track Speed, Made Up Of 26 Sequential Modules, Coupled To Each Other, Through A Hinge-Type System, Made Of Resistant Yellow Plastic, Which Allows The Length To Be Reduced And Be Stored And Transported To Other Places, With A Rubberized Base Fixed To All Modules Through 07 Metallic Screws. The Length Of The Spine Must Be 3 (Three) Meters With An Acceptable Variation Of +/- 2% Of The Requested Length. Each Module Must Have: - Limit Height Of 5.4Cm With An Acceptable Variation Of +/- 3% Of The Requested Height, - Minimum Length Of 22Cm With An Acceptable Variation Of +/- 3% Of The Length, - Maximum Width Of 10Cm With An Acceptable Variation Of +/- 2% Of The Width. - Compressive Resistance Of 10,150Kgf With Acceptable Variation Of +/- 2%. - Resistance To Weathering According To Technical Standard Astm G 154:2012 In Order To Guarantee The Institution, Product Quality When Exposed In Various Types Of Environment. - Resistance To Impacts Proven Through Tests Carried Out In The Laboratory, In Accordance With The Terms Of Reference. - Shore A Hardness Greater Than 95 In The Final Average.- Reflectivity Of The Modules: Each Module Must Have 02 (Two) Units Of Reflective Sticker In The Honeycomb Shape, In Silver Color, With Minimum Reflectivity Under The Observation Angle Of 0, 2 Of 260 Candelas For The Entry Angle -4 And 215 Candelas For The Entry Angle +30, With Acceptable Variation Of +/- 2%. They Must Be 31 Mm Wide With An Acceptable Variation Of +/- 2% And A Length Of 82 Mm, With An Acceptable Variation Of +/- 2%. The Spine Must Be Accompanied By A Transport Bag Made Of Nylon, With Suitable Handles For Transport And Zipper Closure, As Per The Terms Of Reference.