Alkyd Gloss Paint (Enamel) Alvan Prince-Color-Floor Product Type: Alkyd Enamel, Glossy Purpose: Alkyd Gloss Paint Alvan Prince Is Intended For Interior And Exterior Finishing Works For The Purpose Of Decorative And Protective Painting Of Various Surfaces. Scope Of Application: Wooden Surfaces Metal Structures Plastered Surfaces Concrete And Brick Primed Bases Paint Base: Alkyd Composition: Alkyd Binder Organic Solvents Pigments Functional Additives Appearance Of The Coating: Color: According To The Manufacturers Assortment Gloss Level: Glossy Structure: Homogeneous Physico-Chemical Characteristics: Density: 0.90–1.20 G/Cm³ Viscosity: Ready For Use Dry Residue: Not Less Than 45% Smell: Characteristic Of Alkyd Enamels Consumption: In One Layer: 10–12 M² Per 1 Liter (Depending On The Type And Condition Of The Surface) Drying Time (At +20°C): Touch-Free: 6–8 Hours Interlayer Drying: 12–24 Hours Complete Drying: At Least 24 Hours Performance Properties: Weather Resistant Moisture Resistant Resistant To Mechanical Stress Provides A Durable Glossy Finish Application Method: Apply By Brush, Roller Or Spray. Mix Thoroughly Before Use. If Necessary, Dilution With White Spirit Or Solvent Is Allowed (Up To 5–10%). Application Conditions: Air Temperature: Not Lower Than +5°С Relative Humidity: No More Than 80% Packing: Metal Can, Volume – 3.5 Liters Storage Conditions: In A Tightly Closed Container At Temperatures From +5°С To +30°С Away From Fire Sources And Direct Sunlight Compliance Requirements: Products Must Comply With Current Sanitary, Environmental And Fire Standards Of The Republic Of Kazakhstan., Putty, Alkyd Gloss Paint (Enamel) Alvan Prince - Color - White Product Type: Alkyd Enamel, Glossy Purpose: Alkyd Gloss Paint Alvan Prince Is Intended For Interior And Exterior Finishing Works For The Purpose Of Decorative And Protective Painting Of Various Surfaces. Scope Of Application: Wooden Surfaces Metal Structures Plastered Surfaces Concrete And Brick Primed Bases Paint Base: Alkyd Composition: Alkyd Binder Organic Solvents Pigments Functional Additives Appearance Of The Coating: Color: According To The Manufacturers Assortment Gloss Level: Glossy Structure: Homogeneous Physico-Chemical Characteristics: Density: 0.90–1.20 G/Cm³ Viscosity: Ready For Use Dry Residue: Not Less Than 45% Smell: Characteristic Of Alkyd Enamels Consumption: In One Layer: 10–12 M² Per 1 Liter (Depending On The Type And Condition Of The Surface) Drying Time (At +20°C): Touch-Free: 6–8 Hours Interlayer Drying: 12–24 Hours Complete Drying: At Least 24 Hours Performance Properties: Weather Resistant Moisture Resistant Resistant To Mechanical Stress Provides A Durable Glossy Finish Application Method: Apply By Brush, Roller Or Spray. Mix Thoroughly Before Use. If Necessary, Dilution With White Spirit Or Solvent Is Allowed (Up To 5–10%). Application Conditions: Air Temperature: Not Lower Than +5°С Relative Humidity: No More Than 80% Packing: Metal Can, Volume – 3.5 Liters Storage Conditions: In A Tightly Closed Container At Temperatures From +5°С To +30°С Away From Fire Sources And Direct Sunlight Compliance Requirements: Products Must Comply With Current Sanitary, Environmental And Fire Standards Of The Republic Of Kazakhstan.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
