Bids Are Invited For Hiring A Company To Carry Out A Subsidized Construction Project For Housing Units In Urban Areas Of The Municipality Of Jequitinhonha/Mg, Using Discretionary Resources From The National Social Interest Housing Fund (Fnhis), In Accordance With Term Of Commitment No. 970273/2024/Mcidades/Caixa, With Full Supply Of Equipment, Materials And Labor, In Accordance With Attached Spreadsheets And Projects

1.1.1. Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, 1.2.1. Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, 1.3.1. Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, 1.3.2. Mechanized Excavation For Baldrame Beam Or Track Footing With Mini-Excavator (Including Excavation For Placing Formwork). Af_01/2024, 1.3.3. Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M (Natural Soil Adjustment). Af_08/2020, 02/20/2026 - 09:26:38, 1.3.4. Lean Concrete For Ballast, Mixture 1:4, 5:4, 5 (In Dry Cement Mass/Medium Sand/Gravel 1) - Mechanical Preparation With 600 L Concrete Mixer. Af_05/2021, 1.3.5. Lean Concrete For Ballast, 1.3.6. Manufacture, Assembly And Disassembly Of Formwork For Baldrame Beam, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, 1.3.7. Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, 1.3.8. Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, 1.3.9. Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, 1.3.10. Concrete Fck = 25Mpa, Mixture 1:2, 3:2, 7 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With Concrete Mixer 600 L. Af_05/2021, 1.3.11. Launching Using Buckets, Densification And Concrete Finishing In Structures. Af_02/2022, 1.3.12. Mechanized Trench Backfilling With Backhoe Loader (Retro Bucket Capacity: 0.26 M³/Power: 88 Hp), Width 0.8 To 1.5 M, Depth Up To 1, With 1St Category Soil (Without Replacement), With Percussion Soil Compactor Af_08/2023, 1.3.12. Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, 1.4.1 Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, Simple Straight Leg, Made Of Plasticized Plywood Sheet, 18 Uses. Af_09/2020, 1.4.2. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, 1.4.3. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, 1.4.4. Concrete Fck = 25Mpa, 1.4.5. Launch Using Buckets, 1.5.1. Assembly And Disassembly Of Beam Formwork, Propping With Wooden Fork, In Plasticized Wood Sheet, 1.5.2. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5 Ca-60 Steel, 1.5.3. Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8 Ca-50 Steel, 1.5.4. Concrete Fck = 25Mpa, 1.5.5 Launching Using Buckets, 1.6.1 Unidirectional Precast Slab, Bi-Supported, For Lining, Ceramic Filling, Conventional Joist, Total Slab Height Lt = 12 Cm (Filling+Cover) = (8+4). Af_08/2025, 1.7.1 Fence Masonry Made Of Horizontally Drilled Ceramic Blocks Of 14X19x39 Cm (Thickness 14 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, 1.7.2. Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af_10/2022, 1.7.3. Single Putty, In Mortar Mix 1:2:8, Mechanical Preparation, Applied Manually To Internal Walls Of Rooms With An Area Between 5M² And 10M², E = 10Mm, With Splices. Af_03/2024, 1.7.4. Applied Chapisco