Bids Are Invited For Registration Of Prices For Future And Eventual Acquisition Of Equipment And Inputs For Closed Circuit Tv And Alarm Systems.

Lot 1 - Type Cci Cable 2 Solid Pairs: Cable For Alarm And Intercom Systems, 100% Copper Conductor, Maximum Temperature: 70°C, Roll With Minimum 100M., Lot 1 - Monitored Alarm Center I: Monitored Alarm Center Designed For Wired And Wireless Systems, Supporting A Maximum Of 24 Zones, There Are 16 On The Main Board In Duplicate Mode. Its Communication Includes Telephone Line (Pstn), Requiring Fixed Module, 100 Mbps Ethernet For Remote Programming And Cellular Network Support (Gprs/Gsm) Through 2G, 3G Or 4G Modules. The Control Unit Has A Built-In Wireless Receiver For Up To 128 Devices, 2 Pgm Outputs On The Board And A Buffer For 256 Events With Date And Time., Lot 1 - Monitored Alarm Center Ii: High Capacity Alarm Center, Capable Of Supporting A Maximum Of 64 Wired Zones (Using Expanders) And 48 Wireless Zones. Supports Communication Multiple Via Ip Internet (Tcp/Ip Protocol With Low Bandwidth Consumption), Telephone Line (Pstn) And Radio (Optional), In Addition To Supporting 2 Cell Phone Chips (Sim Cards). It Has 3 Programmable Pgm Outputs On The Board And An Intelligent Battery Charger., Lot 1 - Wireless Monitored Alarm Center: Alarm Center Focused On Wireless Devices, With Capacity For Up To 24 Wired Zones And 24 Wireless Zones, Allowing Partitioning Into 2 Distinct Areas. It Has A Receiver Built Into The Board And Supports Ook/Fsk Modulation, With Supervision Of Wireless Devices In Fsk. Includes Ethernet Connection And Supports Communication With 2 Distinct Ip Servers For Monitoring., Lot 1 - Signal Repeater For Wireless Alarm Centers (Universal Receiver): Universal Radio Frequency Receiver With Digital Technology, For Expansion And External Activation, Operating On The Frequency Of 433, 92 Mhz (Ook Or Fsk). It Has 2 Independent Outputs With Nf Or Na Contact, Supporting A Maximum Load Of 10 A/24 Vdc Or 5 A/250 Vac. It Is Capable Of Storing 60 Wireless Devices And Has A 34-Bit Wiegand Communication Interface., 02/20/2026 - 14:29:00, Lot 1 - Wired Magnetic Opening Sensor: Discrete, Wired Magnetic Opening Sensor, Recommended For Use In Indoor Environments Such As Doors And Windows Made Of Glass, Wood Or Light Metals. Uses Reed Switch Detection Method, With An Opening Gap Of 20 Mm (±10%). The Trigger Indication Is Made By Open Contact And The Product Has Anti-Uv Protection., Lot 1 - Wireless Magnetic Opening Sensor: Wireless Magnetic Opening Sensor (433, 92 Mhz) For Internal Use In Non-Metallic Doors And Windows, Using Supervised Communication In Fsk Modulation. The Detection Method Is Reed Switch, With An Opening Gap Of 12 Mm, And The Sensor Sends Information About Low Battery Level And Has An Anti-Jamming Function., Lot 1 - Active Infrared Barrier Sensor (2 Beams): Active Infrared Perimeter Protection Sensor With Two Beams, The Detection Of Which Is Performed By Simultaneously Blocking Both. It Has An External Protection Range Of Up To 70 Meters (Internal Protection Range Of Up To 190 Meters). Alignment Is Facilitated By Targeting And Voltage Level, And The Sensor Has A Type Na Or Nf Alarm Output, Tamper Switch And Ip54 Degree Of Protection., Lot 1 - Active Infrared Barrier Sensor (3 Beams): Wired, Long-Range Active Infrared Barrier Sensor, Which Uses 3 Beams For Greater Vertical Protection And Simultaneous Jamming Detection. The Outdoor Protection Range Is Up To 100 Meters. Alignment Is Done Via An Integrated Two-Digit Display, And The Sensor Has 4 Frequency Channels For