Tenders Are Invited For Design And Execution Of Construction Works - Renovation Of The Surface Of Spacerowa Street In Zawiercie.

1. The Subject Of The Order Is: Design And Execution Of Construction Works - Renovation Of Ul. Spacerowa In Zawiercie.2. The Scope Of The Planned Renovation Works Includes: - Renovation Of The Road (Asphalt): Approx. 3,470.60 M2, Including The Area Of ​​Intersections 610.60 M2, - Replacement Of The Road Curb - 350 M, - Replacement Of The Sidewalk Surface - Approx. 160 M2. Section Length: Approx. 440 M, Road Width: Approx. 6.5 M.3. The Subject Of The Order Includes: - Preparation Of A Design For The Notification Of Construction Works, - Obtaining Decisions And Arrangements Appropriate To The Scope Of The Task, - Preparation Of Appropriate Maps, - Demolition Of The Existing Surface - Milling, - One-Sided Replacement Of Curbs, - Local Leveling Of The Subgrade With An Asphalt Layer, - Execution Of An Asphalt Surface - Wearing Course Kr 3-4 Thickness. 5 Cm, - Use Of Asphalt Tapes To Connect Asphalt Layers, - Supplementation Of Paving Stones With The Substructure At The Pedestrian Crossing, - Construction Of A Paving Stone Surface On The Existing Entrance, - Renovation Of The Existing Sidewalk With A Length Of Approx. 90 M, - Supplementing The Substructure, - Adjustment Of Wells, - Adjustment Of Inlets, - Adjustment Of Water Supply Valves, - Performance Of Acceptance Activities And Preparation Of A Set Of Documents For The Ordering Party, Including Documentation As-Built, - Reconstruction Of The Existing Road Markings. 4. Design Documentation Should Include The Preparation Of: 1) Construction Design (Together With A Set Of Attachments, I.E. Opinions, Arrangements (Including Pkp), Agreements And Permits, As Well As Information Regarding Health And Safety), Which Should Be Submitted To The Ordering Party In 3 Copies In Paper Version And 1 Copy In Electronic Version; The Land Development Plan Included In The Project Should Be Prepared At A Scale Of 1:500; The Project Should Be Developed In Such A Way As To Enable Receiving Confirmation Of No Objection From The Competent Authority To The Notification Of Construction Works; 2) The Detailed Design, Which Should Be Submitted To The Ordering Party In 3 Copies In Paper Version And 1 Copy In Electronic Version; In Addition To The Requirements Adopted When Developing This Type Of Documentation, The Designer Should Compile In A Tabular Form: A) Basic Technical Data Of The Designed Facility, Such As: Length, Width, Area Of Individual Elements Covered By Renovation, Specifying The Material From Which They Were Designed, B) Plots Covered By Renovation, Including The Geodetic Number, Map Card, District And Data Of The Owner Or Holder Of The Land; 3) Technical Specification For The Execution And Acceptance Of Construction Works (Stwiorb), In 1 Copy In Paper Version And 1 Copy In Electronic Version; 4) Bill Of Quantities In 1 Copy In Paper Version And 1 Copy In Electronic Version; 5) The Investors Cost Estimate In 1 Copy In Paper Version And 1 Copy In Electronic Version; 6) Temporary Traffic Organization Project With Ap