Request For Quotation Other Consumables // Ozgede Tauarlar

1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 100 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Electric Brushes Msl-3 Are Designed For Transmitting Electricity In Moving Mechanisms. The Unit On Which It Is Installed Is The Msl-3 Beacon Brush Brand – Vt-1 Drawing Number – 555.133 Size – 4X5x12.5 Number Of Brushes In A Group – 1 Number Of Groups In The Product – 2 2. Requirements For The Supplied Goods 2.1. Electric Brushes Must Be Category 1 And Must Not Have Mechanical Damage, Chips, Scratches, Or Traces Of Oxidation On The Terminals. Each Brush Should Be Wrapped In Paper. The Supplied Batch Must Have Accompanying Documents (Passports Or Labels, Quality Certificate) Confirming The Origin Of The Goods., 1.1. Electric Brushes On The Mv-1200 Are Designed To Transmit Electricity In Moving Mechanisms. The Unit On Which It Is Installed Is The Mv-1200 Electric Motor Brush Brand – Mgs-7 Drawing Number – 555.214 Size – 8X16x20 Number Of Brushes In A Group – 1 Number Of Groups In The Product – 4 2. Requirements For The Supplied Goods 2.1. Electric Brushes Must Be Category 1 And Must Not Have Mechanical Damage, Chips, Scratches, Or Traces Of Oxidation On The Terminals. Each Brush Should Be Wrapped In Paper. The Supplied Batch Must Have Accompanying Documents (Passports Or Labels, Quality Certificate) Confirming The Origin Of The Goods., 1.1. Varnish Lf-171 Is A Solution In Organic Solvents Of Pentaphthalic Resin Modified With Drying (Varnish Lf-171) Vegetable Oil With The Addition Of A Drier. Designed For Producing Weather-Resistant Coatings On Previously Prepared Surfaces Made Of Aluminum And Its Alloys And As An Additive To Glypthal And Pentaphthalic Enamels To Increase The Gloss Of Coatings. The Coating Formed By The Varnish Has Weather Resistance, Strength, Hardness, Elasticity, And Resistance To The Static Effects Of Water And Gasoline-Toluene Mixture. 2. Requirements For The Supplied Goods 2.1. Varnish Lf-171 Gost 23832-79 Must Be Category 1, Produced In The Manufacturers Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Designated Shelf Life., 1.1. Electric Brushes Pt-125Ts-3S Are Designed For Transmitting Electricity In Moving Mechanisms. The Unit On Which It Is Installed Is The Pt-125Ts-3S Converter Brush Brand – Mgs-7 Drawing Number – 555.163 Size – 6.5X5x16 Number Of Brushes In A Group – 1 Number Of Groups In The Product – 4 2. Requirements For The Supplied Goods 2.1. Electric Brushes Must Be Category 1 And Must Not Have Mechanical Damage, Chips, Scratches, Or Traces Of Oxidation On The Terminals. Each Brush Should Be Wrapped In Paper. The Supplied Batch Must Have Accompanying Documents (Passports Or Labels, Quality Certificate) Confirming The Origin Of The Goods., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 320 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Electric Brushes Po-750A-2S Are Designed For Transmitting Electricity In Moving Mechanisms. The Unit On Which It Is Installed Is The Converter Po-750A 555.118 Brush Brand – Mgs-8 Drawing Number – 555.118 Size – 6.5X8x19 Number Of Brushes In A Group – 1 Number Of Groups In The Product – 4 2. Requirements For The Supplied Goods 2.1. Electric Brushes Must Be Category 1 And Must Not Have Mechanical Damage, Chips, Scratches, Or Traces Of Oxidation On The Terminals. Each Brush Should Be Wrapped In Paper. The Supplied Batch Must Have Accompanying Documents (Passports Or Labels, Quality Certificate) Confirming The Origin Of The Goods., Designed For Use As Receivers And Sensors Of Infrared Radiation As Part Of Optical-Electronic Equipment, Photoelectric Automation Systems And Non-Contact Temperature Measurement, Computing And Measuring Equipment, Software-Controlled Equipment And Instruments Operating In The Wavelength Range From 0.5 To 1.12 Microns. 2. Basic Technical Requirements: Technical Characteristics Of The Product Must Comply With The Requirements Of The Technical Description And Operating Instructions. 3. Contents Of Delivery: The Product Must Include: - Photodiodes Fd-10K Agts3.368.029 Tu. 4. Basic Technical Requirements Of The Device: Technical Characteristics Of The Goods (Products) Must Comply With The Requirements Of The Technical Description And Operating Instructions. Scope Of Delivery: 1. The Complete Set Of Delivery Of The Goods (Products) Must Comply With The Requirements Of Gost, Technical Specifications, Technical Descriptions And Operating Instructions For The Goods (Products). 2. The Product Must Be Packaged In Containers That Ensure Its Complete Safety And Quality During Loading And Unloading Operations, Transportation, Including Within The Warranty Period, And Properly Labeled. If The Customer Or The Regulatory And Technical Documentation For The Product Establishes A Corresponding Requirement, The Product Must Be Preserved., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor 30 Uf-25V, 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., 1.1. Glue Vk-3 Ost 1 90281-86 Is Intended For Gluing Metals And Non-Metallic Materials, Including Honeycomb Structures, As Well As For The Production Of Film Phenolic Rubber Adhesive Of The Same Brand. Operating Temperature Range From Minus 60 To Plus 80 0C. 2. Requirements For The Supplied Goods Name Parameter Appearance Viscous Liquid From Gray To Light Brown Color Without Foreign Impurities Or Lumps Viability, H 6-24 Ultimate Shear Strength Of Adhesive Joints Made Of Clad Aluminum Alloy D16at, Mpa At A Temperature Of 20 °C 16.66 At A Temperature Of 80 °C 10.78 2.1. The Glue Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Vk-3 Glue Must Be Category 1, Produced In The Manufacturer’S Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Assigned Shelf Life. Metal Containers For Pouring Containers., 1.1. Sealing Mastic Gost 18680-73 Is Used For Sealing Devices, Components And Assemblies For Sealing Control Sockets Of Radio-Electronic Equipment, Units Of Electrical Machines, Household Appliances, Etc. 2. Requirements For The Supplied Goods. 2.1. Mastic Is Made On The Basis Of Petroleum Bitumen, Plasticizing Resin And Mineral Filler. In Mastics It Is Used In A Form Heated To A Plastic State. The Softening Temperature Of Bitumen Mastics Is From 70 To 800C. Heated Bitumen Sealing Mastic Is Poured Into The Sealing Areas And The Stamp Is Pressed. The Operating Temperature Range Of The Mastic Is From -60 To +1000C. 2.2. The Mastic Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor Bm-2-200-4700Pf±10% 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 240 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Electric Brushes Po-750A-2S Are Designed For Transmitting Electricity In Moving Mechanisms. The Unit On Which It Is Installed Is The Converter Po-750A 555.119 Brush Brand – Mgs-8 Drawing Number – 555.119 Size – 8X16x23 Number Of Brushes In A Group – 1 Number Of Groups In The Product – 4 2. Requirements For The Supplied Goods 2.1. Electric Brushes Must Be Category 1 And Must Not Have Mechanical Damage, Chips, Scratches, Or Traces Of Oxidation On The Terminals. Each Brush Should Be Wrapped In Paper. The Supplied Batch Must Have Accompanying Documents (Passports Or Labels, Quality Certificate) Confirming The Origin Of The Goods., 1.1. Waxed Linen Thread Mackay Gost 14961-91 Is Intended For Beading Wires Of The On-Board Electrical Network. Breaking Load – Not Less Than 25 Kgf. Coating – 100% Natural Wax. Diameter – 1.5 Mm. 2. Requirements For The Supplied Goods. 2.1. Waxed Linen Thread Mackay Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Product Must Be Category 1, Supplied In The Manufacturers Packaging, Ensuring Tightness And Safety, With Accompanying Documents Confirming The Origin Of The Product (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture)., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor; K52-1-68-50 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor K52-2-400-15 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., 1.1. Magnetic Tape Reel Ry6.212.013 Is Designed To Reproduce Information From The Almaz-Up Product. Operating Conditions: Operating Temperature Range From - 600C To +1000C. Climatic Design – Moderate And Cold Climate. 2. Requirements For The Supplied Goods 2.1. Must Comply With Technical Specifications: Ry6.212.013.