Bids Are Invited For Hiring A Company For The Implementation/Construction Of A Day Center In The Municipality Of Vicente Dutra/Rs, Through The Execution Of Complete Civil Works, In Accordance With Architectural, Structural And Complementary Projects, As Well As Technical Specifications Within The Scope Of Process Nº 25/2100-0001966-2 And Fpe Nº 2924/2025, With The Purpose Of Enabling The Execution Of Public Equipment Aimed At The Daily Care Of Elderly People, Ensuring Adequate Infrastructure For The Development Of Social Assistance Activities, Coexistence And Care, In Accordance With Public Social Assistance Policy.

Lot 1 - Supply And Installation Of Construction Plate With Galvanized Sheet Metal And Wooden Structure. Af_03/2022_Ps, Lot 1 - Conventional Location Of Work, Using Template Of Pointed Boards Every 2.00M - 2 Uses. Af_03/2024.*, Lot 1 - Electricity Input, Overhead, Three-Phase, With Recessed Box, 25 Mm2 Cable And Din 50A Circuit Breaker (Concrete Post Not Included). Af_07/2020, Lot 1 - Reinforced Concrete Post With Double T Section, Extension Of 8.00 M, Resistance Of 150 Dan, Type D, Lot 1 - Laying Of Concrete Post With Nominal Length Of 9 M, Nominal Load Of 150 Dan, Concrete Base Embedment With 1 M Of Concrete And 0.5 M Ground (Does Not Include Supply). Af_04/2025, 02/18/2026 - 13:57:51, Lot 1 - Wooden Or Plywood Warehouse (3 Sinapi - 100898) +/- 20 Mm, Lot 1 - Cyclopic Concrete Fck = 15Mpa, 30% Hand Stone In Actual Volume, Including Launch. Af_05/2021, Lot 1 - Sealing Masonry Made From Solid Ceramic Blocks (5X10x20cm) Thick 20Cm, Laying Mortar Prepared In A Concrete Mixer, Lot 1 - Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 8Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Lot 1 - Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Lot 1 - Manufacture, Assembly And Dismantling Of Formwork For Girder, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Lot 1 - Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Lot 1 - Sealing Masonry Made Of Horizontally Drilled Ceramic Blocks Of 14X19x29 Cm (Thickness 14 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Lot 1 - Girder Molded In Place In Concrete, Thickness Of *20* Cm. Af_03/2024, Lot 1 - Girder Molded In Loco In Concrete, Thickness Of *20* Cm. Af_03/2024, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Lot 1 - Pillar Frame Or Beam Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2022, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 Steel Beam, Shoring With Wooden Spike, Simple Right Leg, In Sawn Wood, 4 Uses. Af_09/2020., Lot 1 - Unidirectional Pre-Molded Slab, Double Supported, For Floor, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) = (8+5). (Adapted From Sinapi - 101963), Lot 1 - Concreting Of Beams And Slabs, Fck=30 Mpa, For Precast Slabs Using A Pump - Laying, Thickening And Finishing. (Adapted From Sinapi - 103674), 4 Uses. Af_09/2020, Lot 1 - Conventional Structure Pillar Or Beam Frame