Tenders Are Invited For Roadworks – Rdw In Biała Podlaska: Reconstruction Of Provincial Road No. 698 On The Section From Km 58+350 To Km 60+700, 2,350 Km Long.

Roadworks – Rdw In Biała Podlaska: Reconstruction Of Provincial Road No. 698 On The Section From Km 58+350 To Km 60+700, 2,350 Km Long.. The Subject Of The Order Are Construction Works Consisting Of: Reconstruction Of Provincial Road No. 698 On The Section From Km 58+350 To Km 60+700 With A Length Of 2,350 Km. The Scope Of Works Includes: 1) Measurement Works Together With The Preparation Of An As-Built Inventory And Registration In The District Geodetic And Cartographic Documentation Center, 2) Felling Of Trees With Clearing Of Trunks, Thick Bushes And Undergrowth, As Well As Removal From The Construction Site And Disposal At The Contractors Expense, 3) Execution Of Demolition Works, Dismantling Of The Surface Made Of Concrete Paving Stones And Concrete Tiles, Concrete Surface, Asphalt Surfaces, Crushed Stone Surfaces, Concrete Sub-Bases, Aggregate Sub-Bases, Concrete Edges And Curbs Together With A Concrete Footing, Elements Of Pipe And Frame Concrete Culverts - With Removal From The Construction Site And Disposal At The Contractors Expense, 4) Demolition Of A Steel Structure Bus Shelter, Walls And Roof Made Of Plexiglass Or Tempered Glass - Transfer The Shelter To The Konstantynów Commune, 5) Demolition Of The Bus Shelter, Walls Made Of Silicate Bricks, Concrete Floor With Removal From The Construction Site And Disposal At The Contractors Expense, 6) Dismantling Of The Cobblestone Surface With Loading, Transport And Unloading In The Place Indicated By The Investor, 7) Dismantling Of Pipe Culverts, Plastic Pipes With Loading And Transport And Unloading In The Place Indicated By The Investor, 8) Dismantling Of Mesh Fences, Fences Made Of Wooden Poles And Boards On Wooden Posts, Gates Made Of Steel Sections With Posts Made Of Pipes Or Steel Sections, With Storage In A Place Indicated By The Investor, 9) Milling Of Asphalt Surfaces, 10) Earthworks - Removal Of A Layer Of Fertile Soil, Excavations And Trenches Performed Mechanically, Forming And Compaction Of Embankments, 11) Construction Of Through Parts Of Prefabricated Culverts Made Of Hdpe Pipes With Diameters Of 80Cm, 60Cm, 50Cm, 40Cm With A Circumferential Stiffness Class Of 8Kpa With A Diagonal Ending Made Of Diagonal Prefabricated Reinforced Concrete Elements, On A Sandstone Bench In Geotextile, 12) Construction Of Channels Made Of Pvc Sn8 Pipes Pressed Together, 13) Construction Of A 0.5 M Diameter Rainwater Inlet With A Snap-On Cast Iron Grate With A Settling Tank, 14) Construction Of A Sewage Connector Made Of C16/20 Concrete On A C12/15 Concrete Foundation, 15) Construction Of A Trapezoidal Slope Sewage Made Of Prefabricated Concrete Elements On A Concrete Footing, 16) Strengthening The Slopes Of The Inlets And Outlets Of The Culvert With Cobblestones On Concrete Footing, 17) Securing The Ditch Slopes With Openwork Concrete Slabs, 18) Laying Open And Covered Reinforced Concrete Channel Sewage On A Concrete Footing Made Of C12/15 Concrete, 19) Profiling And Compacting The Subsoil For The Construction Layers Of The Pavement, 20) Making A Drainage Layer Of Medium-Grained Sand Or Sand Mix, Layer Thickness After Compaction 10 Cm, 21) Making A Frost Protection Layer Of Medium-Grained Sand Or Gravel, Thickness After Compaction 25 Cm, 22) Making