Request For Quotation Purchasing Goods Used In Medical Organizations

The Refrigerator Is Equipped With A High-Precision Temperature Control System Using A Microcomputer And A Digital Display With A Temperature Accuracy Of 0.1°C. Volume 525 Liters. The Refrigerator Has An Rs 485 Access Port And Has The Ability To Connect A Remote Alarm. The Refrigerators Are Equipped With The M+Enerdgy Core Energy Management System And A Closed Air Cooling System, Which Reduces Energy Consumption By More Than 40%. Lighting: Led. Alarm: High/Low Temperature, High Ambient Temperature, Power Failure, Low Battery, Sensor Failure, Door Ajar, Usb Built-In Data Logger Failure, Communication Failure. Panel Thickness 55 Mm. Number Of Shelves 6 Pcs. Number Of Doors 1 Pc. Cooling System: The Refrigerator Is Equipped With A European Compressor, A High-Efficiency Air-Cooled Condenser And A Tube-Plate Evaporator For Fast Cooling. All Company Products Are Equipped With Refrigerants That Do Not Have A Negative Impact On The Environment. Number Of Compressors: 1 Pc. Hull Plating Materials: Pcm (Phase Change Material) - A Material That Changes The State Of Aggregation, Coated. Freezer Maximum Rated Power: 310W (Meling Yc-525L), Foldable Modular Eva Foam Mats With Easy Connection For The Physical Therapy Room Of A Stroke Center. Rugs Should Be Modular, Easy To Clean, And Moisture-Resistant Material. The Mats Must Be Non-Slip, Scratch-Resistant, Safe For Patients To Practice Physical Exercise In, And Resistant To Disinfectant Treatment. Color Black (80 Pieces) + Gray (80 Pieces). The Size Of One Cell Is At Least 32*32Cm, Thickness Is At Least 1 Cm., Otorhinolaryngology Patient Chair Elema-N Kpo1 With A Hydraulic Lift - Designed To Accommodate And Fix The Required Position Of The Patient During Procedures Performed By An Otorhinolaryngologist. The Chair Must Be Equipped With An Electromechanical Device For Unfolding It From The “Chair” Position To The “Table” Position With Fixation Of Any Intermediate Position. The Folding Process Is Controlled Using A Push-Button Remote Control. The Chair Must Be Equipped With A Hydraulic Device For Adjusting The Height Of The Seat Above The Floor. The Height Change Process Is Controlled Using A Hydraulic Pedal. The Chair Must Be Equipped With Folding Armrests; The Chair Must Allow The Seat To Rotate 360 ​​Degrees. With Fixation In Any Position. The Load Capacity Of The Chair Is At Least 120 Kg. The Chair Must Operate From An Alternating Current Network With A Voltage Of 220 V +10% And A Frequency Of 50 Hz; Overall Dimensions Of The Chair: Length In The “Table” Position - 1950 Mm; Length In The Chair Position - 1050 Mm; Width - 680 Mm; The Maximum Height In The “Chair” Position (The Top Point Of The Headrest) Is 1600 Mm, The Seat Height Adjustment Range Is 700-850 Mm. The Power Consumed By The Chair Should Not Exceed 75 Va. The Weight Of The Chair Is No More Than 60 Kg. The Upholstery Of The Chair Is Artificial Leather Of Various Colors, Resistant To Repeated Disinfection Using A Chemical Method With The Addition Of Detergent And Chloramine Solution. A 30X10x390 Mm Stainless Steel Rail (Rail) Should Be Installed On The Back Of The Chair Back For Hanging Additional Accessories., Milk Rubber Nipple, Vit-2 Psychrometric Hygrometer. The Unit Of Measurement For Humidity Is %. The Minimum Humidity Value Is 20. The Maximum Humidity Value Is 90. The Temperature Unit Is °C. Maximum Temperature Value 40