Request For Quotation Purchase Of Machinery, Equipment, Tools, Production And Household Equipment

Technical Specification 2. Technical And Quality Characteristics: In The Bedding Set: 2.1. Duvet Cover – 1 Piece, Cutout On The Side Completely Covering The Blanket, Cutout Of The Duvet Cover Is Processed With Facing Stitched Seam With A Width Of At Least 0.5 Cm. The Inner Edge Of The Facing Is Ground To The Wrong Side And A Stitch Is Placed On 0.1Cm From The Edge. The Connection Of The Longitudinal And Transverse Sides Of The Duvet Cover Is Carried Out Using A Sewing, Double Seam, Seam In Castle The Internal Hem Of The Sections Is At Least 0.3-0.5 Cm, The Finished Seam Width Is At Least 0.5-0.7 Cm. Finished Size Duvet Cover Length No Less 220Cm, Width Not Less Than 200Cm; 2.3. Pillowcases – 1 Piece, Dimensions: Length No Less Than 70 Cm, Width No Less Than 50 Cm, Top Edges Of The Pillowcase Along The Width Process With A Hem Seam With A Closed Cut 0.7-0.8 Cm Wide, Inward Hem At Least 0.3-0.6 Cm, Side Cuts Are Made With A Closed Double Seam, The Internal Hem Of The Side Cuts Is At Least 0.3-0.5 Cm, The Width Of The Finished Seam 0.5-0.7Cm. The Flap Of The Pillowcase Must Be At Least 25Cm And Secured With Additional Stitching; 2.4. Fabric: Satin Stripe, 100% Cotton, Jacquard Weave In The Form Of Strips Of At Least 3*3 Cm, Count Of At Least 200 Threads Per Cm2; 2.5. The Design, Ornament, Or Photograph Should Be Clarified With The Customer, Not Lazy, Not Slipping. 3. Other Characteristics: The Product Must Be New And Not Used. 4. Compliance With Standards (International/Domestic): Gost 31307-2005. Bed Linen. General Technical Conditions. 5. Inspection And Testing: Upon Delivery Of Goods, Inspection Is Required For Quality And Compliance With The Requirements Of This Technical Specification. 6. Warranty Period For The Supplied Goods: The Warranty Period For The Supplied Goods Is At Least 12 Months From The Date Of Signing Invoice. * The Potential Supplier Must Confirm Each Item Of The Technical Specification.