Tenders Are Invited For Delivery And Installation Of A Power Generator Along With A Connection Design For The Social Welfare Center In Skwierzyna

The Subject Of The Order Includes The Delivery And Assembly Of A Brand New Power Generator With A Connection Design For The Social Welfare Center In Skwierzyna As Part Of The Cybersecure Commune Of Skwierzyna Project - Point 17: Purchase Of A Power Generator With A Connection Design And Installation: Ops According To The Specifications In Annex 1. As Part Of This Order, The Ordering Party Requires The Performance Of All Design, Preparatory, Installation And Arrangement Works Related To The Proper Functioning Of The Delivered Unit. The Contractors Obligations Include In Particular: Preparation Of A Technical Design For The Foundation And Connection Of The Unit, Along With The Necessary Arrangements. The Location Of The Unit Should Be Agreed With The Ordering Party, Away From Residential Buildings. If Necessary, Making Arrangements With Enea Operator And Relocating The Measurement System Outside The Building Of The Social Welfare Center, Preparing The Area Of Plot 75, Precinct 3 Skwierzyna For Placing The Generator On A Concrete Slab, Making A Connection From The Place Of Placing The Generator To The Building, Delivery, Installation And Commissioning Of The Automatic Reserve Switching System (Szr), Delivery Of The Generator In Accordance With The Minimum Requirements Specified In The Technical Specification Constituting An Annex To The Application, Connection To The Prepared Installation Along With All Activities Necessary To Start And Operate The Generator And Ezr System. The Order Also Includes The First Start-Up And Training In The Operation Of The Device For Persons Indicated By The Ordering Party. The Ats System Is To Be Implemented On Motor-Driven Devices With Forward Currents Of Min. 125 A . Construction Of Appropriate Installations: Power Take-Off Cables, Auxiliary Power Supply Cable, Control Cables And Control (Telecommunication) Cables. After Completion, It Must Be Carried Out By A Person With Appropriate Design Qualifications. Technical Data Of The Opps Installation. Contracted Power: 33 Kw. Power Supply Type: 3-Phase. Pre-Meter Protection: 63 A. Rated Power Prp: Determines The Maximum Available Power Of The Unit At Variable Load In Continuous Operation. Permissible Overload +10% For A Maximum Of 1 Hour For Every 12 Hours Of Operation. The Average Power Consumption Over 24 Hours Should Not Exceed 70% Of The Prp. Esp Maximum Power: Determines The Maximum Emergency Power That The Generator Can Achieve In The Event Of A Primary Power Failure. Overload Is Unacceptable. The Generator Should Be Selected So That The Average Load Does Not Exceed 70% Of Esp. Permissible Total Operating Time Is 500 Hours Per Year, Including 25 Hours Of Operation With Esp Power. The Generator Must Be Brand New, Delivered With A Set Of Operating Fluids And A Set Of Accessories Necessary For The First Start-Up And Operation - For The Manufacturers First Service Without Any Additional Purchases. A) Conducting Training For Persons Authorized To Operate The Generator. B