Tenders Are Invited For Construction Work – New Service And Transformation Building In Schwedt/Oder, Handelsstraße 3A, Lot 10 - Windows And External Doors

Construction Work – New Service And Transformation Building In Schwedt/Oder, Handelsstraße 3A, Lot 10 - Windows And External Doors. The City Of Schwedt/Oder Is Planning To Build A New Service And Transformation Building In The Western Area Of ​​The Current Bus Station In Schwedt (Zob). The New Building Is To Be Realized As A Four-Story Structural Building Made Of Steel With External Dimensions Of Approximately 39 Meters By 31.5 Meters. The Gross Floor Area Of ​​The New Building Will Be Approximately 4,200 Square Meters Across All Floors. Structurally, The New Building Is Planned In A Structural Grid Of 3.75 X 7.00 - 8.00 M. The Flexible Steel Skeleton Made Of Columns And Beams Is Complemented By Elemental Cross-Laminated Timber Ceilings. The Vertical Bracing Of The Building Is Provided By Diagonally Arranged Beams. In-Situ Concrete Is Used For The Foundation. The Highly Elemental Post-Transom Façade Has Window Elements With Triple Glazing. All Closed Areas Consist Of Removable, Highly Insulated Wooden Stud Walls With Facade Sheets. The Interior Walls Are Mainly Made Of Dry Construction. A Geothermal System With A Heat Pump Supplies The Building With Heat In Winter And Provides Moderate Cooling In Summer. The Geothermal System Is Supplemented By A Base Load-Optimized Pv System On The Roof. A Mechanical Ventilation System Ventilates Both The Large Event And Seminar Rooms On The Ground Floor And The Interior Rooms In The Core Zone. Lot 10 - Windows And External Doors The Service Profile Includes The Manufacture, Delivery And Assembly Of A Post-Transom Construction Made Of Wood And Aluminum With French Doors, External Doors, Fixed Glazing, A Lift-Slide Door System And Aluminum Sheet Cladding As Insert Elements. The Total Area Of ​​The Facade Elements Is Approx. 812M2. The Area Of ​​The Aluminum Sheet Cladding Is Approx. 87 M2. The Pr Facade Must Be Installed In Wooden Panel Elements Manufactured On Site. Sun Protection Awnings With Guide Rails Are Also Provided, Suitable For Installation On A Pr Facade. The Sun Protection Has A Total Area Of ​​Approx. 683 M2.