Structures And Parts Of Structures – Emc-Tila. The Logistics Department Of The Defense Forces (Hereafter Procurement Unit) Is Requesting A Participation Application For Equipping The Emc Measurement Space For The Riihimäki Garrison Area For The Defense Forces In Accordance With This Participation Application Request. The Object Of The Acquisition Is The Emc Measurement Room To Be Built Inside The Existing Building And Its Equipment. The Emc Measurement Room Must Use The Available Space As Efficiently As Possible (Maximizing The Internal Dimensions Of The Measurement Room). The Usable Length Is About 14.5 M, The Width Is About 9.9 M And The Height Is About 6.7 M. The Flatness Of The Spaces Concrete Floor Is 1 Mm Per 1 M. The Facility Has Liquid-Circulation Floor Heating, Which Limits The Installation Of Fasteners On The Floor. Vehicles With A Maximum Weight Of 35 T With An Axle Weight Of 9 T Will Be Tested In The Emc Measurement Room. The Spaces Access Opening Must Be At Least 4 M Wide And 4 M High. The Vehicle Under Test Is Running, Which Means That The Space Must Have An Exhaust Gas Outlet, For Which The Exhaust Gas Vacuums In The Hall Can Be Used. The Characteristics Of The Emc Measurement Room Must Be A Semi-Anechoic Chamber (Semi Anechoic Chamber) According To The Standards Aectp-500 Or Mil-Std-461. The Protection Attenuation Should Be Approximately 100 Db In The Frequency Range 10 Khz – 40 Ghz.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
