Bids Are Invited For Acquisition Of Public Lighting Materials, Intended For The Maintenance And Replacement Of The Public Lighting System In The Municipality Of Anahy/Pr
Bids Are Invited For Acquisition Of Public Lighting Materials, Intended For The Maintenance And Replacement Of The Public Lighting System In The Municipality Of Anahy/Pr
Base For Copel Standard Photocell: Receptacle Type For Photoelectric Relay, With Application In Public And Private Lighting Systems For Automatic Control Of Switching On And Off Of Luminaires. Technical Identification: Receptacle For Photoelectric Relay, Electrical Category, Ncm 8536.90.90. Detailed Technical Specifications: Nominal Operating Voltage 220V Ac, Frequency 60 Hz. Maximum Supported Current 10A. Maximum Load Power 2200W (Resistive). Approximate Dimensions: Diameter 70Mm ±5Mm, Height 50Mm ±5Mm. Material And Construction: Polycarbonate Body With High Mechanical And Uv Resistance, In Black, With Tinned Brass Connection Terminals For High Conductivity And Corrosion Resistance. Nitrile Rubber (Nbr) Sealing For Ip65 Degree Of Protection, Guaranteeing Resistance To Dust And Water Jets. Electrical Connection Type Nema Ansi C136.10, With 3 Pins (Phase, Neutral, Load). Standards And Conformities: Manufactured And Tested In Accordance With Abnt Nbr 5123 (Receptacles For Photoelectric Relays), With Compulsory Inmetro Certification For Electrical Components. Degree Of Protection Ip65 According To Abnt Nbr Iec 60529. Application And Use: Operating Temperature -20°C To +50°C, Relative Humidity 0% To 95% Without Condensation. Installation On Luminaires Or Pole Arms, Compatible With Nema Standard Photoelectric Relays. Safety And Ergonomics: Class Ii Electrical Insulation, Resistant To Voltage Surges Of Up To 6Kv. Warranty And Support: Minimum Of 24 Months Against Manufacturing Defects. Packaging And Supply: Supplied In Individual Or Multiple Packaging (Boxes Of 10 Units), With Simplified Installation Manual., Arm For Public Lighting: Simple Curved Type, Made From Hot-Dip Galvanized Carbon Steel Tube, In Accordance With Nbr 6323, With A Nominal Length Of 1.5 Meters And An External Diameter Of 45 Mm (±2 Mm). Application: Support For Public Lighting Luminaires On Concrete Or Metal Poles. Material: Sae 1010/1020 Carbon Steel Tube, Minimum Wall Thickness 2.65 Mm. Finish: Hot-Dip Galvanizing With A Minimum Zinc Layer Of 60 M (Micrometers), Guaranteeing Anti-Corrosion Protection For At Least 15 Years In Urban Environments. Bend: Smooth Bend Radius To Prevent Damage To Internal Wiring. Tilt: Tip Angle Of 10° To 15° In Relation To The Horizontal To Optimize Light Distribution. Tip For Fixing The Luminaire With An External Diameter Of 45 Mm, Compatible With Standard Fitting. Base For Fixing To The Post With Suitable Dimensions For Clamps Or Screws, With Holes For Cable Passage. Approximate Weight: 3.5 Kg. Standards: Abnt Nbr 6323 (Hot Dip Galvanization Of Steel And Cast Iron Products), Abnt Nbr 14725 (Safety In Electrical Installations). Supply: Individual Unit, Without Fixing Accessories, With Nominal Length Of 3.0 Meters And External Diameter Of 46 Mm (±2Mm). Application: Support For Public Lighting Luminaires On Concrete Or Metal Poles, For Greater Lighting Range. Material: Sae 1010/1020 Carbon Steel Tube, Minimum Wall Thickness 3.0 Mm. Finish: Hot-Dip Galvanizing With A Minimum Zinc Layer Of 70 M (Micrometers), Guaranteeing Anti-Corrosion Protection For At Least 20 Years In Aggressive Environments. Bend: Optimized Bend Radius For Light Distribution And Wiring Protection. Inclination: Tip Angle Of Inclination Of 10° To 15° In Relation To The Horizontal. Tip For Fixing The Luminaire With An External Diameter Of 46 Mm, Compatible With Standard Fitting.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
