Bids Are Invited For Price Registration For Future And Eventual Acquisition Of School And Hospital Furniture, With Exclusive Lots For Me And Epp

School Chair - With Clipboard On The Right Side, Made Of Thermoplastic Resin, Capable Of Holding The Entire Sheet Of A4 Paper Horizontally/Vertically, Measuring A Minimum: 0.55 Length Seat, Back And Board Made Of Polypropylene (Pp), Using The Thermoplastic Injection System, With A Date On The Bottom Of The Seat And Below The Board Containing The Date Of Manufacture, Locking Done By Screws. Backrest, Seat And Board Finishes: Rounded And In Polypropylene (Pp). Structure Made Of Steel. Tube Closing Tips: Made Of Polypropylene And Fitted Into The Structure. It Has 16 Ventilation Holes In The Seat And 16 In The Back. Load Capacity: 120 Kg; -Minimum Backrest Width: 46 Cm; -Minimum Backrest Height: 27 Cm; - Minimum Seat Width: 45 Cm; - Minimum Seat Depth: 41 Cm; - Book Holder: Metal Or Polypropylene. Non-Slip Tips Completely Surrounding The Tubes That Make Up The Feet (To Avoid Corrosion Of The Feet), Performing The Function Of Protecting The Paintwork, Preventing Against Rust, The Entire Metallic Structure Is Manufactured In Industrial Steel Tube Treated By Sets Of Chemical Baths For The Protection And Longevity Of The Structure, Interconnected By Mig Welding And Painted Using The Epoxy Powder System, Colors Components Available In Polypropylene: Blue, Green, Yellow Or Red, Seat, Back And Arm Injected With The Manufacturers Logo In High Relief, With The Option Of Inserting The City Hall Logo. Stickers/Plates Or Any Other Type Of Identification That May Be Removable Will Not Be Accepted. (Wide Competition), With The Option To Insert The City Hall Logo. Stickers/Plates Or Any Other Type Of Identification That May Be Removable Will Not Be Accepted. (Reserved Quota Item 01), Childrens Trapezoid Set - (Comprising 06 Tables With Book Holders, 06 Chairs And 01 Central Table). Trapezoid-Shaped Table, Enabling The Formation Of Circles With 6 Tables; 06 Chairs And A Central Table, For Collective And Individual Use, Table Top Made Of Thermoplastic Resin With Minimum Measurements: 550Mm Chair With Seat And Back Manufactured Using Thermoplastic Resin Injection Process, Ensuring Durability And Resistance, Has A Premium Finish, In Addition, Seat With Minimum Measurements: 330Mm X 300Mm Depth, Seat/Floor Height Approximately 349Mm, Fixed By Screws. Backrest With Minimum Measurements: 330Mm 390Mmx390mm. With Date Date On The Bottom Of The Seat, Top, Book Holder And Central Table Containing Date Of Manufacture. Non-Slip Shoes Involving The Ends Of The Tubes That Make Up The Feet, Injected In Thermoplastic Resin, Virgin Polypropylene And Attached To The Structure Using Snap Rivets Or Screws. Structure Formed By Steel Tubes, Metallic Structure Made From High-Resistance Industrial Carbon Steel Tube, Treated By Chemical Baths And Welded Using The Mig Process. Structure Color: Gray, Backrest, And Central Table With Log

Refer document

FileName	File Description
Global Tender Document	f65720ff-7319-4adf-9f86-7d1d34ba39f2.html