Bids Are Invited For The Acquisition Of Level Iii-A Ballistic Vests (Includes Internal And External Covers), In Accordance With The Conditions Established In This Call For Proposals And Annexes

Ballistic Vest - Level Iii-A, Sufficient To Withstand Impacts From Firearm Projectiles Of Calibers 9 Mm And 44 Magnum, Produced In Flexible Panels Made Of Multiaxial Aramid And A Layer Of Polyethylene Foam, For Police Use, And Must Provide Frontal And Back Protection, With A Maximum Of 11 Layers, Complying With The Standards Required By The Command Of The Brazilian Army, Applied At The Marambaia Proving Ground In Accordance With Nij Standard 0101.04. The Ballistic Panel Assembly Will Be Subdivided Into Two Parts, One To Enable Thorax-Abdominal Protection And The Other For The Dorsal Region, Must Act Not Only To Stop The Trajectory Of The Projectile Impacted Against The Vest, But Also To Perfectly Absorb The Resulting Shock Waves. Internal Covers - The Ballistic Panels Must Be Covered By An Internal Cover Made Of Fabric With Filament 100% Polyamide 6.6, High Tenacity Multifilament, Smooth, Title 210 Denier With 34 Filaments Or Similar, In Order To Protect Them From Various Factors Such As: Humidity, Rainwater, Sweat From The Users Body, Immersions, With Thermofusion Or Ultrasound Closure. Ripstop, Composed Of 67% Polyester And 33% Cotton, Offering High Resistance To Traction And Tear. The Internal Part Must Be Covered With Thermal Management Fabric, Which Provides Greater Comfort To The User, Favoring The Regulation Of Body Temperature. The Standard Coloring Must Be Night Blue. The Adjustment System To The Users Body Is Carried Out Through Adjustable Flaps Positioned On The Abdominal Sides (Lower Part) And Adjustable Straps Over The Shoulders (Upper Part), Being: A Side Flap On Each Side In The Abdominal Region And An Upper Strap On Each Side In The Shoulder Region. They Have High-Adhesion Velcro Ends In Black, Ensuring A Firm And Safe Fit To The Operators Body.