Bids Are Invited For Acquisition Of 02 (Two) Agricultural Tractors, In Different Power Bands (Items 1 And 2), All New, Zero Hours, Manufactured Equal To Or More Than The Year 2025, From The Manufacturers Normal Production Line, Intended To Meet The Operational Demands Of The Municipal Agriculture And Economic Development Management Of The Municipality Of Novo Horizonte Do Sul/Ms, Linked To Agreements No. 982229/2025 (Proposal No. 048498/2025), Destined For The Acquisition Of An Agricultural Tractor 110 Cv; And Nº 982227/2025 (Proposal Nº 048457/2025), Intended For The Acquisition Of An Agricultural Tractor 105 Cv, According To The Conditions And Requirements Established In This Terms Of Reference And Its Annexes

Agricultural Tractor 105 Hpnew Equipment, Zero Hours, Manufactured In 2025 Or Later1. Engine1.1. Electronic Diesel Engine.1.2. Three (03) Cylinders In Line, Minimum.1.3. Minimum Cylinder Capacity: 3,000 Cm³.1.4. Minimum Power: 105 Hp, According To Equivalent Sae/Iso Standards.1.5. Minimum Torque: 400 Nm At 1,500 Rpm.1.6. Turbo Powered, With Intercooler.1.7. Fuel Tank With Minimum Capacity Of 150 Liters.1.8. The Engine Must Belong To The Same Industrial Group As The Tractor, Ensuring Full Compatibility Between Engine, Transmission, Hydraulic System And Onboard Electronics.1.9. The Engine Must Be Nationally Manufactured, In Compliance With The Technical, Environmental And Quality Standards In Force In Brazil..2. Transmission2.1. Synchronized Type.2.2. Minimum Of 12 Forward Gears And 12 Reverse Gears.2.3. Electro-Hydraulic Reverser (Power Shuttle).2.4. Wet Multi-Disc Clutch.2.5. Speed ​​Reducer (Creeper).3. Front Axle3.1. Auxiliary Front Drive (4X4).3.2. Electro-Hydraulic Drive.3.3. Electro-Hydraulic Differential Lock.4. Hydraulic System4.1. Open Center Hydraulic System.4.2. Gear Pump With Minimum Flow Of 85 L/Min. (Hydraulic System With Main Pump For Agricultural Implements, With Minimum Flow Of 85 L/Min, Admitting Systems With Independent Pumps For Direction And Auxiliary Services, As Long As The Main Pump Meets The Required Flow)4.3. Minimum Operating Pressure: 200 Bar.4.4. Minimum 3 Vcrs.5. Hydraulic Lift – Three Points5.1. Electronic Control.5.2. Minimum Rear Lift Capacity: 4,000 Kgf.6. Power Take-Off (Tdp)6.1. Electro-Hydraulic Drive.6.2. Mandatory Revolutions (Engine Rpm): 540/540E.7. Wheelset And Tires7.1. Agricultural Tires Compatible With The Size Of The Machine.7.2. Rear Tires: 18.4-34 R1.7.3. Front Tires: 14.9-24 R1.7.4. Set Must Respect Suitable Kinematics For 4X4.8 Traction. Cabin And Ergonomics8.1. Closed, Air-Conditioned Cabin.8.2. Operators Seat Fixed Mechanical Seat, Agricultural Tractor 110 Hp New Equipment, Manufactured In 2025 Or Later1. Engine1.1. Electronic Diesel Engine.1.2. Four (04) Cylinders In Line, Minimum.1.3. Minimum Cylinder Capacity: 4,000 Cm³.1.4. Minimum Power: 110 Hp, According To Equivalent Sae/Iso Standards.1.5. Minimum Torque: 420 Nm At 1,500 Rpm.1.6. Turbo Powered, With Intercooler.1.7. Fuel Tank With Minimum Capacity Of 180 Liters.1.8. The Engine Must Belong To The Same Industrial Group As The Tractor, Environmental And Quality Standards In Force In Brazil.2. Transmission2.1. Synchronized Type.2.2. Minimum Of 12 Forward Gears And 12 Reverse Gears.2.3. Electro-Hydraulic Reverser (Power Shuttle).2.4. Wet Multi-Disc Clutch.2.5. Speed ​​Reducer (Creeper).3. Front Axle3.1. Auxiliary Front Drive (4X4).3.2. Electro-Hydraulic Drive.3.3. Electro-Hydraulic Differential Lock.4. Hydraulic System4.1. Open Center Hydraulic System.4.2. Gear Pump With Minimum Flow Of 85 L/Min.4.3. Minimum Operating Pressure: 200 Bar.4.4. Minimum 3 Vcrs.5. Hydraulic Lift – Three Points5.1. Electronic Control.5.2. Minimum Rear Lift Capacity: 4,000 Kgf.6. Power Take-Off (Tdp)6.1. Electro-Hydraulic Drive.6.2. Mandatory Revolutions (Engine Rpm): 540/540E/1000.7. Wheelset And Tires7.1. Agricultural Tires Compatible With The Size Of The Machine.7.2. Rear Tires: 18.4-34 R1.7.3. Front Tires: 14.9-24 R1.7.4. Set Must Respect Suitable Kinematics For 4X4.8 Traction. Cabin And Ergonomics8.1. Here