Tenders Are Invited For Preparation Of Design Documentation For The Task Titled: Reconstruction Of District Road 1136W In Wyśmierzyce, Ul. Kopernika.

1.Description Of The Existing Conditiondistrict Road No. 1136W, Ul. Kopernika Is A Through Street With A Street Cross-Section With Curbs On Both Sides, The Road Width Is 6.00 M. The Beginning Of The Development Is Located At The Intersection With National Road No. 48, The Width Of The Road Lane Is From 11.0 M To 17.0 M. The Street Along The Length Of The Reconstruction Runs Through Residential Areas With Buildings On Both Sides. On The Section Planned For Reconstruction, Kopernika Street Forms One Intersection With A Paved Road. There Is Technical Infrastructure In The Road Area. The End Of The Development Is Located At The Intersection With The Municipal Road. The Scope Of The Study Is Marked In Annex No. 2B. Mileage Of Reconstruction: From Km 0+000 To Km 0+285, The Total Length Of The Section To Be Reconstructed Is 285M. 2. Design Assumptions2.1. Design Data: As Part Of The Reconstruction, A Pedestrian Sidewalk With The Minimum Width Permitted By Law Should Be Designed On The Left Side. Entrances To The Properties Should Be Designed For Existing Buildings. The Sidewalk Is Planned To Be Made Of Concrete Paving Stones. Road Drainage Should Be Designed Within The Road Area. A New Design For Permanent Traffic Organization Should Be Developed For The Whole.2.1.2 Road Drainage:1. In Connection With Existing Green Areas, Drainage Should Be Planned Using Them. - If It Is Not Possible To Drain Water In The Above-Mentioned Manner, Other Technical Solutions Should Be Proposed.2.2 The Documentation Should Be Prepared In Accordance With Applicable Regulations And Principles Of Technical Knowledge.2.3 The Design Documentation Should Be Prepared In A Complete State From The Point Of View Of The Purpose It Is To Serve.2.4 The Design Documentation Will Be The Basis For The Implementation Of Construction Works.2.5 The Design Documentation, Bill Of Quantities And Technical Specification For The Execution And Acceptance Of Works Should Be Developed In Accordance With The Principles Set Out In The Ministers Regulation Infrastructure Development And Technology Of December 20, 2021 On The Detailed Scope And Form Of Design Documentation, Technical Specifications For The Execution And Acceptance Of Construction Works And The Functional And Utility Program. The Bill Of Quantities Should Take Into Account The Maximum Possible Consolidation Of Individual Construction Works. At The Stage Of Preparing The Bill Of Quantities, It Is Required To Make Arrangements With The Ordering Party Regarding The Form, Scope Of The Bill Of Quantities And The Method Of Consolidating The Bill Of Quantities Items.2.6. The Investors Cost Estimate Should Be Prepared In Accordance With The Regulation Of The Minister Of Infrastructure, Development And Technology Of December 20, 2021 On Determining The Methods And Basis For Preparing The Investors Cost Estimate, Calculating The Planned Costs Of Design Works And The Planned Costs Of Construction Works Specified In The Functional And Utility Program