Request For Quotation Purchasing Goods . Specifications

Cable Vvgng-Ls 4X16 (Full Marking Vvgng(A)-Ls 4X16) Power Copper Cable With 4 Cores With A Cross-Section Of 16 Mm², Designed For Transmitting Electricity (0.66/1 Kv) In Rooms With High Fire Safety Requirements, As It Has Reduced Smoke And Gas Emissions. Main Characteristics: Construction: 4 Copper Conductors With A Cross-Section Of 16 Mm² (Single- Or Multi-Wire), Insulation And Sheath Made Of Pvc Of Reduced Fire Hazard. Diameter: ~20.7 Mm. Weight: ~ 0.95 Kg/M. Power (At 380V): Withstands A Load Of About 49.5 Kw (Current Up To 85-90A). Application: Dry/Wet Rooms, Cable Racks, Fire Hazardous Areas. Service Life: At Least 30 Years. Marking Features: Ng - Does Not Propagate Combustion. Ls (Low Smoke) - Low Smoke And Gas Emissions. A - Fire Safety Index (For Use In Bundles)., For Completing Basic Equipment. Flame Pipe For Ecoflam Gas Burners. Length 394 Mm. Ecoflam Flame Tube Ø215/156/200/155 X 3950 Mm, Used To Equip The Burner Of An Industrial Boiler, Heat And Steam Generator. The Hot Flue Gases Released During Combustion Of The Air-Fuel Mixture Are Safely Removed Through The Pipe. Optimal Sizes And Configuration Of The Nozzle Contribute To Stable Combustion, Formation Of The Required Flame Size And Safe Combustion. The High-Temperature Stainless Steel From Which The Flame Pipe Is Made Does Not Collapse Or Corrode When In Constant Contact With Heated Gaseous Substances. Nozzle Material – Heat-Resistant Stainless Steel; Well-Thought-Out Shape For Stable, Safe Combustion, Free Removal Of Gases; Application In Industrial Heating Systems, Technological Installations; Special Holes For Fixing To The Burner; Efficient Heat Transfer To The Boiler/Heat Generator; Resistance To External Influences, Composition Of Combustion Products. Flame Tubes Of Other Shapes And Sizes Are Presented In Our Catalog. Dimensions: Length 394 Mm, Weight: No Less Than 4 Kg. Dimensions: No Less Than 39.4X0x0 Cm Installation Of A Pipe On The Body Of Ecoflam Gas Burners Blu Models. Main Characteristics: Type Of Flame Pipe: - Extended. Length 394Mm., Mineral Wool, Foiled, Rolled. Thermal Insulation Material Based On Fiberglass. Roll Length Is Not Less Than 15 M, Width Is Not Less Than 1 M, Wool Thickness Is 5 - 8 Cm Special Version Of The Ursa Brand. Products Are Factory Covered (Laminated) With A Vapor Barrier Layer - Aluminum Foil. Type Of Packaging: Roll. Technical Characteristics: Thermal Conductivity: 0.044 W/Mk, Flammability: G1 (Low-Flammability), Fire Hazard Class: Km2. Application Temperature: From -60 ˚С To +270 ˚С. Density 11 Kg/M3. In Factory Waterproof Packaging, Knitting Wire 1.2 Mm, Steel Grade - St3, Marking - To, Gost: 3282-74, Thermally Treated, Annealed. It Is Used In Construction, Industry And Households As A Fastening Element For Concrete Structures And Fastening Reinforcing Elements. Coil Of 25 Kg. (In One Bay At Least 2750 Meters)., Please Read The Technical Specifications Carefully. Rubber Boots. Characteristics: Material - Pvc (Polyvinyl Chloride). Shoe Sole Material - Pvc (Polyvinyl Chloride) Fullness - F. Season - Demi-Season. Upper Material - Polymer Materials. Shoe Lining Material - Textile. Temperature Range - From -0 To +30. The Length Of The Insole Is Not Less Than 28 Cm. The Height Of The Boot Is Not Less Than 39 Cm. Features Of The Model - Two-Layer Sole. Sizes: 43R - 3 Pairs, 44R - 2 Pairs., Please Read The Technical Specifications Carefully. Boots For Protection Against Industrial Pollution, Mens, Rubber. Eva With High Rubber Content Up To -55°C. They Have A Sole With A Thermoplastic Rubber Insert. Lightweight Eva Boots With A High Rubber Content Guarantee Elasticity In Any Frost. Multi-Layer Insulation Liner With Natural Fur (With Insert Stockings (Warm Socks) From Ntp). A Water-Repellent Cuff With A Drawstring Fastener Will Reliably Protect You From Bad Weather. Reinforcement Of The Toe And Heel To Protect Against Mechanical Damage. Thick Sole With Deep Tread - Provides Warmth, Shock-Absorbing Properties And Stable Walking On Ice Or Wet Snow. Height Is At Least 38 Cm. Sizes: 43R - 3 Pairs, 44R - 2 Pairs., To Complete The Basic Equipment. Gas Pressure Regulator Giuliani Anello Fsdr40. 30-500 Mbar. With A Built-In Filter To Reduce The Maintenance Of Stable Gas Pressure, Connection Type - Internal Threaded. Inlet Pressure Range P1: P2 + 30 Mbar To 500 Mbar (0.5 Bar). Working Range P2: Series Production Products Are Supplied With A Neutral Spring, Other Ranges According To The Spring Table. Compliance With Standards: En 88-1. Accuracy Class: Class A. Closing Pressure: In Accordance With En 88-1 Standard Operating Temperature: -15ºc - +60ºc. Action: Through Stretching Of The Spring, Without Additional Energy. Neutral Spring With A Working Range Of 10-30 Mbar., Construction Scrap L 1500 Mm Length And 30 Mm Diameter, Round, Forged Steel 45, Hardened Working Parts, Two Working Profiles (Cone-Shaped And Flat). For Dismantling Various Structures And Breaking Down Solid Materials - Asphalt, Concrete, Brick. Resistance To Intense Mechanical And Shock Loads - The Tool Is Made Of Forged Steel 45. Reliability - Hardened Working Parts Provide Optimal Hardness And Strength. Two Working Profiles (Cone-Shaped And Flat) - Construction Scrap Is Effective When Carrying Out Impact Work And Work With Tightly Fitting Objects. Color - Black Weight With Packaging, Not Less Than 8000 G., Drainage Pump Dn-1100 68/2/7 (1100 W, 15500 L/H, Head 10 M). Power (W):1100. Voltage:220. Pump Type: Submersible. Max. Water Capacity: 15500 L/H. Design: Drainage. Max. Pressure: 10 M. Purpose For Water: Dirty Water. Max. Depth: 8 M. Permissible Diameter Of Solid Particles: 35 Mm. Float: External. Case Material: Plastic. The Drainage Pump Will Pump Out Dirty Water From Any Pond, Reservoir, Or Flooded Basement With A Maximum Speed Of 285 L/Min. The Operation Of The Device Is Ensured By A Single-Phase Asynchronous Electric Motor With A Squirrel-Cage Rotor. High Power Of 1100 W Allows The Pump To Operate With High Performance And Supply Liquid Under A 10-Meter Pressure. The Drainage Pump Can Be Used For Pumping And Subsequent Disposal Of Wastewater And Contaminated Water, Which Can Contain Particles With A Diameter Of Up To 35 Mm. The Amount Of Fibrous Inclusions Should Be Minimal. The Plastic Housing Provides Reliable Protection For The Electric Motor And Pumping Mechanism. Type - Centrifugal, Submersible, Vertical. Max. Water Temperature - 35°C. The Outlet Diameter Is 1/2 Inch. Material Plastic. Engine Type - Electric. Mains Voltage 220 V. Frequency - 50 Hz. Dimensions In The Box Are At Least 40 × 20 × 10 Cm. Package Weight Is At Least 6 Kg., Asbestos Cord Shaon Diameter 25 Mm Gost 1779-83. For Sealing Joints, Doors, Hatches Of Boilers, Furnaces And Pipelines. Specifications: Max. Temperature Not Less Than 400°C. Flammability Group - Ng (Non-Flammable). Thickness, 25 Mm. Type - Sealing Cord. Color - White, White Matte., Hexagonal, Crowbar Mount. The Crowbar Is Used To Dismantle Various Mechanisms, Structures, And Parts. Weight - At Least 1 (Kg). Length - At Least 60 Cm. One End Is Pointed, The Other End Is A Shoulder Blade. The Blade Angle Is 30 Degrees. Material - Steel 65Mn. Section Dimensions Are At Least 25-30 Mm., To Complete The Basic Equipment. Gas Pressure Regulator Madas Frg/2Mc Dn 50 Fl. The Madas Fc500022 020 Pressure Regulator Is Equipped With A Reinforced Diaphragm. It Is Used In Gas Installations To Automatically Regulate Pressure And Maintain A Constant Output Value Taking Into Account The Settings, Regardless Of The Gas Pressure In The System And Flow Rate. The Regulator Is Designed For Medium Pressure Up To 1000 Mbar. The Outgoing Pressure Parameters Are Adjustable From 190 To 400 Mbar. The Regulator Has A Wear-Resistant Design, In The Manufacture Of Which Aluminum, Steel, Brass, Butadiene-Nitrile Rubber, And Viledon Are Used. The Body Is Made Of Aluminum Alloy. The Design Includes A Spring For Regulating The Outgoing Pressure. A Gas Filter Made Of Non-Woven Material Is Placed At The Inlet, Containing Foreign Impurities And Contaminants Larger Than 50 Microns. The Regulator Is Fixed Using Dn 50 Flanges. Fixation Is Carried Out Horizontally Or Vertically. Setting The Output Pressure Parameters Is Carried Out By Turning The Screw Under The Control Of A Pressure Gauge, Which Is Connected Through A Fitting On The Body. The Device Is Designed For 40 Years Of Operation, With Periodic Replacement Of Individual Components Of The Filter, Membrane, And Spring. The Pressure Regulator Is Designed For External Temperatures From -40 To +60°C, Which Allows It To Be Installed Indoors And Outdoors. Main Characteristics: Maximum Overpressure: 1000 Mbar, Output Pressure Range: From 190 To 400 Mbar, Connection Type: Dn 50 Internal Thread. Filtration Degree: 50 Microns. Weight: At Least 4.5 Kg. Dimensions: No Less Than 23X23x28.5 Cm., Steel Plug With Internal Thread Dn 15 G1/2, Gost 17379-2001. Designed For Temporary Or Permanent Closing Of The End Holes Of The Pipeline. Has An Internal Cylindrical Pipe Thread., Suction-Pressure Hose Pvc6 150 Mm, Length 6 M. Product Material - Polyvinyl Chloride. Product Area Of Application - Water Supply, Petroleum Products. Working Medium - Water. Diameter 150 Mm. Length - At Least 6 M. Reinforced Hose - Yes. Color Green/Transparent. Warranty Period - 12 Months. Type Of Reinforcement - Spiral. The Inner Surface Is Smooth. The Outer Surface Is Ribbed. The Hose Is Made Of A Special Type Of Soft Pvc, Reinforced With A Metal Spiral. The Hose Is Resistant To Impacts And Pressure, Abrasive Wear, Ultraviolet Radiation And Exposure To A Large Number Of Chemicals. Operating Temperature: From -25°C To +60°C; Bending Radius: No More Than 5 Bar; 400 Mm. Used For Sewage Disposal Machines And Motor Pumps., Suction And Pressure Hose Dn Internal - 100/102 Mm, Dn External - 114 Mm. Working Pressure Not Less Than 2.5 Bar. Bending Radius, Not Less Than 280 Mm. Vacuum, Not Less Than 700 Mbar. Reinforced Suction Hose With An Internal Diameter Of 100-102 Mm For A Motor Pump. Scope Of Application: Pumping Technical Liquids, Pumping Thick Food Masses. Temperature Range: From -15 °C To +65 °C. Material: Pvc. Construction: Smooth Inner Wall, Galvanized Spiral. Transparent Or Green Suction And Delivery Hose Made Of Polyvinyl Chloride. Reinforced With A Metal Spiral Made Of Galvanized Steel, Which Is Resistant To Moisture. The Weight Of The Hose Is From 0.16 To 6.35 Kg/M, It Can Withstand Significant Loads, High Pressure, And Vacuum. Dimensions: At Least 6 Meters. Used For Sewage Disposal Machines And Motor Pumps.