1. Product Description 1.1. Heat-Shrinkable Tubes With A Diameter Of 4 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break No Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 320 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Epoxy Adhesive 88P (Glue 88 Np) Is Used For Cold Gluing Of Rubbers Based On General Purpose Rubbers To Metal, Including Painted Surfaces, Glass, Wood And Other Materials, And Is Also Used For Gluing Rubber To Rubber. Products Glued With 88P Glue Are Operational At Temperatures From -500C To +700C. Products Glued With 88P Glue (With Sealed Ends And Edges) Can Be Used In Sea And Fresh Water. Glue 88P Does Not Cause Corrosion Of Steel And Aluminum Alloys. Adhesive 88P Is Made On The Basis Of Rubbers Nk, Skn, Skb, Sks, Skms, And Nayrite. Name Of Indicator Norm According To Gost (Tu 38.105540-85) Exposure Time From 5 Minutes To 2 Hours Complete Curing Time, H 24 Viscosity V3-246, C Not Less Than 45 Number Of Layers 1-2 Shelf Life, L 5 Packaging, L 20 2. Requirements For The Supplied Goods 2.1. The Glue Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Glue Must Be Category 1, Produced In The Manufacturers Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Designated Shelf Life., 1.1. Heat-Shrinkable Tubes With A Diameter Of 12.7 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break No Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 15.8 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break No Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1. Description Of The Product 1.1. The 6Lr61 Battery Is An Alkaline (Alkaline) Battery With A Voltage Of 9V. 6Lr61 Batteries Are Used To Power Devices With Low And Constant Power Consumption - Alarm Clocks, Microphones, Remote Controls For Television And Audio Systems, Etc. The Batteries Are Packed In A Blister, 1 Piece Each. Name Parameter Size Crown, 6F22, 6Lr61, E, Pp3 Voltage, V 9 Chemical Composition Of Manganese-Zinc Alkaline (Zn-Mno2) Height, Mm 48.5 Weight, G 46.0 Blister Packaging Type Quantity Per Package, Pcs. 1 Capacity, Mah 565 Waterproof Housing Yes Overall Dimensions, Mm 25.5X16.5X47.5 Service Life, G 3 Warranty Period, G 1 2. Requirements For The Supplied Goods 2.1. The Power Battery Must Be Manufactured In Accordance With The Requirements Of Established Standards, According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Product Must Be Category 1, Supplied In The Manufacturers Packaging, Ensuring Tightness And Safety, With Accompanying Documents Confirming The Origin Of The Product (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 6.4 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break No Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 4.8 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break No Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 5 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break No Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 240 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 100 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets.
