Bids Are Invited For Hiring Of Company(S) To Supply Consumable Materials, Ppe (Personal Protective Equipment), Tools And Equipment For Use By Foundation Students In Practical Classes And Development Of Prototypes In Mechatronics, Machining And Metalwork Laboratories, In Accordance With Dfd, Preliminary Technical Study And Term Of Reference.

Spiral Wire Organizer 6Mm 1/4 Black, Spiral Wire Organizer 16Mm Color Pca9685 16 Channels For Servo Motor Information Servo Motor Control Module And Pwm Ports Operating Voltage: 3.3 To 5 Vdc Terminal Block For External Power Supply Compatible With Microcontrollers 3, 3 And 5V Has 12 Bits Of Resolution Information Address Selection I2c Frequency 40 To 1Khz Dimensions 62 Mm X 20 Mm X 25 Mm Peso 11G, 06/02/2026 - 15:48:58, 06/02/2026 - 15:49:02, 06/02/2026 - 15:49:03, Microcontrolador Pic12f675 Dip-8 * 12F675 * Tipo De Encapsulamento: Tht Tipo De Montagem: Tht Number Of Pins: 8 Eeprom Memory: 0.13 Kb Total Capacity Of The Ram Memory Module: 0.06 Kb Flash Memory: 1.75 Kb, Pic Microcontroller Pic Pic16f877a-I/P - Features 0.001Kb Of Ram Memory. Tht Assembly. Has Dip42 Encapsulation., Arduino Uno R3 With Usb Cable. Specifications: Operating Voltage: 5 V; Input Voltage: 7-12V; Digital Ports: 14 (6 Can Be Used As Pwm); Analog Ports: 6; I/O Pin Current: 40 Ma; Pin Current: 3.3V 50 Ma; Flash Memory: 32 Kb (0.5 Kb Used In Bootloader); Sram: 2 Kb; Eeprom: 1 Kb; Clock Speed: 16 Mhz., Esp32 Wroom-32 Wifi And Bluetooth Module Expansion Shield Board - 30 Pins And Usb Micro/Type C Specifications: Compatible Module: Esp32-Wroom-32; Dc Power Jack: 6.5A 16V; Micro Usb And Usb Type C: 5V; Approx Dimensions: 16Mm X 54Mm X 69Mm; Weight: 24G., Esp-Wroom-32 Model: Esp32 - Esp32 Devkit (30 Pins) Supply Voltage: 4. 5 ~ 9V Dc Operating Current (Typical): 80 Ma Logic Level: 3.3 V Controller: Esp-Wroom-32 Microprocessor: Tensilica X Tensa 32-Bit Lx Clock: Up To 240 Mhz Sram: 520 Kb Adc Pin: 18 12-Bit Adc Pins External Flash Memory: 4Mb Gpio With Pwm, I2c, Spi Functions Wifi Network Support: 802.11 B/G/N (2.4 To 2.5 Ghz) Security: Wpa/Wpa2/Wpa2-Enterprise/Wps Encryption: Aes/Rsa/Ecc/Sha Operating Mode: Station / Softap / Softap + Station/ P2 Bluetooth: V4.2 Br / Edr E Ble (Bluetooth Low Energy) Gpio Digital Pins: 11 (All With Pwm) Pwm Resolution: Up To 16 Bits Does Not Require The Use Of Arduino Integrated Antenna Supports Remote Firmware Upgrade, Wemos D1 Mini Pro Wifi Esp8266, Board Nodemcu Esp8266 Base Specifications: Base Plate: Nodemcu Adapter: For Nodemcu Expansion Compatible: With Nodemcu Lolin Fixing: Through 4 Holes On The Board Has All Nodemcu Pins Jack P4 For External Power Compatibility: Nodemcu Lolin External Power: 6 A 24Vdc Dimensions (Lxwxh): ~60X59x12mm Weight: 25G, Nodemcu V3 Lolin - Development Kit With Esp8266 Programming And Power Supply Via Micro-Usb; Ch340 Usb Serial Chip; Operating Voltage: 5V - 9V (Via Microusb And Vin Pin); Operating Current: On Average 70 Ma (With Peaks Of 200Ma); Wifi Chip Esp8266 - 12E With Standard Wifi Connection 802.11 B/G/N And Built-In Antenna; Antenna Range: 90M; Ram Memory: 20 Kb; Flash Memory: 4Mb; 10 (Ten) Gpio S Ports: With Miso, Mosi, Sck, Pwm, Spi And Rx, Tx (Serial Communication) Functions 01 (One) Adc Port - 10 Bits Resolution; 03 (Three) Operating Modes: Access Point /Station /Access Point + Station; Supports Up To 5 Tcp/Ip Connections And Tcp And Udp Communication; Extra Pins For Access To Gnd, Vin (Input Voltage) And 3.3V; Operating Temperature: - 40ºc To +125ºc; Programming Modes: (Ide Arduino