Bids Are Invited For Acquisition Of Caterpillar Model 120K Motor Grader Parts

Retainer Ring With 120.65Mm Inner Diameter – Serial Number 9D-7972. D-Ring Retainer Internal Diameter (Mm): 121 Main Seal Material: Rubber Cross Section Direction: Curved Material: Nitrile Rubber / Nbr / Hnbr / Xnbr, O-Ring Retainer With 291, 69Mm Inner Diameter – Serial Number 5P-2545. Cross Section Diameter (In): 0.14 Inner Diameter (In): 11.48 Material: Nbr - Nitrile, Nitrile (Nbr) Stroke Size (In): 277 Polymer: Nbr (Nitrile Butadiene), Washer With 13.5Mm Inner Diameter – Serial Number 5P-8245. Hardened Steel Coating: Zinc Phosphate + Oil Inner Diameter: 13.5 Mm (0.53 In) Outer Diameter: 25.5 Mm (1.00 In) Thickness: 3 Mm (0.12 In) Fits M12 Or 1/2 In Bolts Washer Type: Flat Washer Material: Hardened Steel Coating: Zinc Phosphate + Oil Provides Protection Against Corrosion Up To The Mounting Point (Painting Recommended For External Applications). 72 Hour Salt Spray Resistance To Red Rust. Coating Color – Dark Gray To Black. Set Screw Sizes (In): 1/2 Inside Diameter (In): 0.531 Outside Diameter (In): 1.004 Outside Diameter (In): 1.004 Thickness (In): 0.118 Inside Diameter (Id) - 1 (In): 0.53 Hardened: Yes Thickness - 3 (In): 0.12 Finish: Phosphate And Oil Coated Outer Diameter (De) - 2 (In): 1.00, Hard Washer 3.5 Mm Thick – Series Number 5P-8248. Material: Hardened Steel Washer Type: Flat Washer Set Screw Sizes (In): 3/4 Coating: Zinc Phosphate +Oil Provides Corrosion Protection Up To Mounting Point (Paint Recommended For Exterior Applications). 72 Hour Salt Spray Resistance To Red Rust. Coating Color – Dark Gray To Black. Outside Diameter (In): 1.437 Thickness (In): 0.138 Inside Diameter (Id) - 1 (In): 0.79 Hardened: Yes Thickness - 3 (In): 0.14 Finish: Phosphate And Oil Coated Outside Diameter (In) - 2 (In): 1.44 Outside Diameter (In): 1.437 Inside Diameter (In): 0.787, Cutting Edge (Blade) Of Steel Section 1.826.40Mm Long – Series Number 7D-1576. Curved Cutting Edge Machine: Motor Grader Serration: Non-Serrated Material: Uniformly Hardened (Dh2) Thickness (In): 0.75, Steel Shim 0.25Mm Thick – Serial Number 2G-6794. For Use With 3/4 Inch Hardware Width (In): 3.00 Thickness (In): 0.01 Material: Shim Steel Length (In): 17.00 Hole Size (In): 0.812, 1.52Mm Thick Steel Shim – Serial Number 2G-3221. Material: Carbon Steel, 115Mm Tapered Roller Bearing Cover – Serial Number 2N-2138. Tapered Roller Bearings Reduce Friction And Provide Protection Between Mating Parts. They Have Been Specifically Designed To Handle Large Radial And Axial Loads. Material: Alloy Steel, Blade Support Plate 6Mm Thick – Serial Number 8W-1749. 6Mm Thick Blade Support Plate Used On Drawbar Circle Description: The Blade Support Plate Is A Flat Plate Used To Support The Blade Support Assembly On The Drawbar Circle. The Plate Is Often Made From A Durable Material, Such As Metal, And Is Designed To Fit Into The Bracket, Providing Additional Support For The Wear Straps. The Sheet Comes With A Wide Variety Of Sizes, Thicknesses And Other Features, Depending On Requirements. Attributes: • Comes With 3 Mounting Holes