Bids Are Invited For Price Registration For The Future And Eventual Acquisition Of Materials, Led Luminaires And Related Accessories Intended For Public Lighting In Municipalities Associated With Cimog, According To Specifications Defined In The Terms Of Reference – Annex I Of This Notice.

Public Led Luminaire Up To 40W4000 At 5,000K, Minimum Luminous Flux 5,600Lm, Ip66, Fp≫0.99, Lifespan 102,000H, Irc 70, Ik10, Dps 10Kv/12Ka, Luminous Radiation Angle 80º A 150º (Type Ii Limited Average (Cut-Off), Nominal Supply Voltage 100-277Vac, 5M Pe Power Cable, Polycarbonate Or Tempered Glass Lens, Current Harmonic Distortion < 10%, Operating Ambient Temperature -30ºc To 50ºc, Injected Aluminum, 0-10V Dimming, Base Socket 7 Pins, Have Breathing Valve. Registered With Inmetro P.62/2022 And Procel. Breathing Valve. Registered With Inmetro P.62/2022 And Procel Seal, Public Led Light Up To 80W4000 At 5,000K, Minimum Luminous Flux 11,200Lm, 7-Pin Base Socket, Has A Breathing Valve Registered With I¬¬¬Nmetro P.62/2022 And Seal. Procel, Public Led Luminaire Up To 100W4000 At 5,000K, Minimum Luminous Flux 14000Lm, Have A Breathing Valve Registered With Inmetro P.62/2022 And Procel Seal, Public Led Luminaire Up To 120W4000 At 5,000K, Minimum Luminous Flux. 16800Lm, 01/29/2026 - 14:04:14, Public Led Luminaire Up To 150W4000 To 5,000K, Minimum Luminous Flux 21000Lm, Public Led Luminaire Up To 180W, 4000 To 5,000K, 25,200Lm, Relay Photoelectronic Indelible Engraving On The Top Or Lid, At Least, Information On The Name And/Or Brand Of The Manufacturer, Nominal Voltage, Power, Electrical Contact Diagram And Direction System Indication For Better Operation; Warranty Period;Base Made Of Polypropylene;Mounting Support Made Of Electrically Insulating Material That Does Not Allow Deformation When Handled;Attached To The Cover By A System That Ensures Adequate Fixation, In Order To Allow It To Be Removed Without Damaging It;Lid Made Of Polycarbonate Stabilized Against Uv Radiation, Electrically Insulating, Resistant To Impacts And Bad Weather;Contacts Fitting In Tinned Brass And Rigidly Fixed To The Support; Must Not Present Cracks, Burrs, Sharp Edges Or Bubbles; Must Be Sealed With Ultrasonic Welding After Final Assembly; Casing In Electrically Insulating Material, Resistant To Impacts And Weathering, Resistant To Temperatures Of Up To 70° And With Mounting Support In Engineering Plastic, Firmly Attached To The Cover;Sealing Gasket Made Of Rubber Foam Or Elastic Material With A Hardness Of 35 ±5 Shore A, With A Smooth Surface That Allows Rotation Without Undue Displacement After Assembly Of The Assembly;Degree Of Protection At Least Ip-67 (Ingress Protection);Electrical Diagram Type Nf;Optical Sensor With Stable Operation During Its Useful Life;Activation With 5S Delay;Time Maximum Operating Time To Turn Lamps On And Off With Constant Illumination Is 5 Minutes Within The System Operating Range: 105 V To 305 V, -5ºc To 50ºc; They May Be Micro-Welded Or Brazed By Currents Or Surges Of Current That Pass Through Them, Curved Galvanized Arm With Shoe For Pole - 1.5 Mt, Hot-Dip Galvanized Arm Measuring 1.50 Mt Curved With Shoe; Individual Identification In A Legible Manner