Bids Are Invited For Hiring A Specialized Company For The Construction Of 20 Housing Units (Popular Houses) In The Municipality Of Amélia Rodrigues/Bahia, According To Commitment Term No. 987049/2025/Mcidades/Caixa

Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/20, Mechanized Cleaning Of Plant Layer, Vegetation And Small Trees (Trunk Diameter Less Than 0.20 M), Using A Tracked Tractor. Af_0, Electrical Power Input, Overhead, Three-Phase, With Embedded Box, 10 Mm2 Cable And Din 50A Circuit Breaker (Concrete Post Not Included). Af, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03, Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_, 05/02/2026 - 10:28:49, Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M (Adjustment Of The Natural Soil). Af_08, Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, 5 Cm Thick. Af_01, Manufacture, Assembly And Disassembly Of Shoe Formwork, Made Of Resin Plywood Sheet, E=17 Mm, 4 Uses. Af_, Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2, Baldrame Beam And Running Shoe Using 6.3 Mm Ca-50 Steel - Assembly. Af_01/, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01, Shoe Concreting, Fck 20 Mpa, Using Jerica - Laying, Compacting And Finishing, Manual Backfilling Of Trenches, With Percussion Soil Compactor. Af_08/, Manual Excavation For Baldrame Beam Or Running Footing (Including Excavation For Placement Of Formwork). Af_0, Thickness 5 Cm. Af, Assembly And Disassembly Of Formwork For Baldrame Beam, In Sawn Wood, E=25 Mm, Baldrame Beam And Running Shoe Using 8 Mm Ca-50 Steel - Assembly. Af_01/, 3 Mm - Assembly. Af_01, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/20, Concreting Of Crowning Block Or Baldrame Beam, Densification And Finishing, With Percussion Soil Compactor. Af_0, Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Trace 1:3 With Manual Preparation., Surface Waterproofing With Cement Mortar And Sand, With Waterproofing Additive, E = 1.5Cm. Af_, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, 8 Uses. Af_09/2020, Assembly And Disassembly Of Beam Formwork, Without Propping, Made Of Resin Wood Sheet, 8 Uses., Propping With Wooden Fork, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 8 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 10 Steel, Unidirectional Precast Slab, Bi-Supported, For Flooring, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) = (8+4). Af_11/2020, Concreting Of Pillars, Fck = 20 Mpa, Using Buckets - Launching, Densification And Finishing., Concreting Of Beams And Slabs, Fck=20 Mpa, For Any Type Of Slab With Buckets In A Single-Story Building - Launching, Masonry For Sealing Horizontally Drilled Ceramic Blocks Of 9X19x19 Cm (Thickness 9 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Pre-Molded Lintel With Up To