Request For Quotation Racks, Medical Tables, Cabinets, Stool, Stand For Bins And Basins

Pelvis Stand (White Frame). The Design Of The Stand Is Collapsible. The Stand Is Telescopic. The Diameter Of The Platform For Placing Cans Is Mechanically Adjustable And Allows Installation Of Cans With A Diameter Of 350 To 500 Mm. The Base Of The Stand Is Mounted On 5 Support Legs With Plastic Plugs. Adjustment Of The Height Of The Stand Table Above The Floor Level Is Carried Out Mechanically And Is Fixed With A Clamping Screw: Lower Level – 580+-5 Mm, Upper Level – 910+-5 Mm. Frame: Base Profile Pipe 25*25+-3 Mm With Polymer Powder Painting. There Are Plastic Plugs On All Visible Ends Of The Pipes. Stand: Round, Adjustable In Height And Diameter., Stand For Sterile Containers - Equipped With A Lifting Mechanism With A Pedal. Load Capacity Of At Least 7 Kg. The Stand Is Made Of A Metal Profile Coated With A Polymer Powder Coating, Which Is Most Resistant To Various Disinfectant Solutions. Characteristics Lxwxh - 500*450*1400+-5 Mm, Weight - 14-15 Kg., Bobrov Table Sb-2. The Table Frame Is Made Of Square Pipes And Has A Polymer-Powder Coating (Color White/Light Gray), Impact-Resistant And Safe. The Table Top And Shelf Are Made Of Stainless Steel With A Thickness Of 0.5-0.6 Mm And Are Fixed To The Frame With Rivets. The Table Is Installed On 4 Legs With Movable Wheels With A Diameter Of 125-127 Mm, 2 Of Them Have A Braking System (Gray Rubber On The Wheels). The Table Has Two Shelves. Steel 0.8-0.7 Mm Thick. Overall Dimensions: Width: 1800 Mm Depth: 570 Mm Height: 850 Mm+-3%. Volume: 0.18+-0.02 M3, Weight: 27+-1 Kg. St Rk 3428-2019, Metal Floor Cabinet, Intended For Use In Operating Rooms. W*D*H 1000*400*1600Mm+-5. The Cabinet Is Made Of Stainless Steel. The Lower Section Consists Of Two Sections For Collecting Used Products, Closed With One Door, The Handle Is Located At The Top In The Middle And Is Made Of First-Class Stainless Steel. At The Top There Are Two Compartments, Consisting Of Three Open Rounded Compartments Each Compartment, For Storing Clean Shoe Covers, Hats And Masks. The Table Is Installed On 4 Adjustable Anti-Slip Supports. The Table Frame Is Made Of Square Pipes And Has A Polymer Powder Coating, Which Is Hygienically Safe And Corrosion-Resistant. Color White. If The Product Is Supplied Unassembled, Assembly Is Carried Out By The Supplier. Warranty - 1 Year. St Rk 3428-2019, Plastering Table Made Of Metal Width 100 Cm Depth 50-55 Cm Height – 77-80 Cm. The Table Has 3 Drawers And 2 Shelves Equipped With Handles. The Table Is Installed On 4 Anti-Slip Legs. There Is A Stainless Steel Tray Mounted On The Side, Width 30 Cm, Depth 40-45 Cm, Capacity 5-6 Liters For Diluting Gypsum. The Bottom Tray Is Reinforced With A Metal Stand. The Tabletop And Tray Are Made Of Aisi 304 Stainless Steel With A Thickness Of 0.5-0.6 Mm. The Table Frame Is Made Of Square Pipes And Has A Polymer-Powder Coating (White), Impact-Resistant, Safe. Weight: 27+-1 Kg. If The Product Is Supplied Unassembled, Assembly Is Carried Out By The Supplier. Warranty - 1 Year. St Rk 3428-2019, Table For Operating Instruments Of The Goose Type, Stainless Steel Tray 0.5-0.6 Mm Thick, Removable. Swivel And Lifting Mechanism. Four Caster Wheels With A Diameter Of 50-60 Mm. The Frame Is Metal, Coated With A Polymer Powder Coating, Most Resistant To Various Disinfectant Solutions, And Shock-Resistant. Dimensions: Width 700* Depth 450* Height 750/1000Mm+-1%. Gost 26161-89