Tenders Are Invited For Turbine Works – Sturing Turbine + Alternator

Turbine Works – Sturing Turbine + Alternator. Ivago Has An Extraction Turbine That Drives A Generator. The Turbine Is A 2-Body Overhang Turbine: The Rotors Are Suspended Floating Outside Their Bearings. The 2 Bodies Are Connected To The Reduction Gearbox, Which In Turn Is Connected To The Synchronous 3-Phase Generator. The Turbine Is Used To Convert High-Pressure Steam (Steam Hd Of 36 Barg) Into Medium-Pressure Steam (Steam Md Of 10 Barg) And Into Electrical Energy. The Installation Has Been In Use Since 2006. Various Parts Of The Control And Protection Cabinets Are Outdated, No Longer Supported Or At The End Of Their Lifespan And Need To Be Replaced. The Contractor Must Offer A Solution To Keep The Installation Operational Until The End Of 2030, Especially 4 Years After The Conversion In June 2026. Alternatives Are Possible In Terms Of Choice Of Component Suppliers. The Entirety Of Components And Controls Must Meet Strict Safety Requirements (Sufficient Sil Level). The Works Can Only Continue During The Annual Shutdown Of The Power Plant. The New Installation Must Include At Least The Same Functionalities And Security As The Current Installation. The Supplied Solution And Components Must Guarantee A Minimum Of 5 Years Of Operation. An Additional Control Option Must Be Added To The New Installation: A Power Control. This Will Be Controlled By An External Signal. The Conversion Must Take Place During The Factory Shutdown Of June 2026. The Works Can Start In Week 23 (Starting On Monday 1 June 2026). From Saturday, June 20, 2026, Steam Will Be Available Again And The Hot Tests Can Be Started. It Is Up To The Tenderer To Add A Binding Schedule To The Quotation. Ideally, The Conversion Works On The Turbine Are Completed Simultaneously With The Other Works And The Steam Can Be Turbined As Soon As The Steam Quality Is Good.