Tenders Are Invited For Delivery Of Drag Winch Type Deko2 -55Z

1 The Contractor Undertakes To Sell And Deliver To The Ordering Party For Remuneration (Delivery), On The Terms Specified In The Contract, 1 Piece Of The Deko2-55Z Dragline, Hereinafter Also Referred To As The Subject Of The Order.2 The Dragline With Full Documentation Adapted To Work In Underground Mine Workings In A Potentially Explosive Atmosphere Should Have The Following Parameters: A) Type Of Electric Motor Dsg-250M4, B) Max Engine Power. – 55 Kw,C) Engine Speed 1450 - 1500 Rpm) Rope Diameter 16 - 18 Mm,E) Rope Length 125 - 200 M,F) Overall Dimensions: Length 1320 - 1540, Width 1640 - 1785, Height 760 - 100 Mm,G) Total Weight Of The Winch Without The Rope 2200 - 3130 Kg,H) Network Type: Three-Phase It Network With Isolated Transformer Neutral Point,I) Supply Voltage: 500 [V],J) Protection Level Ip 54.3 The Winch Should Be Equipped With: A) Two Systems Of Control Levers,B) With A Gearbox Adapted To The Medium Operation Mode (Z1 = Z2 With An Average Pulling Force Of 19 Kn And A Return Force Of 14 Kn),C) With Additional 2 Sets Of Flexible Couplingsd) With 2 Sets Of Brake Bands Lined With Ferode. 4 The Supplied Drag Winch Should: A) Comply With The Requirements Specified In The Regulation Of The Minister Of Energy Of November 23, 2016. On Detailed Requirements For The Operation Of Underground Mining Plants (Journal Of Laws Of 2017, Item 1118), B) Should Meet The Requirements Of Directive 2014/34/Eu Of The European Parliament And Of The Council Of 26 February 2014. On The Harmonization Of The Laws Of The Member States Relating To Equipment And Protective Systems Intended For Use In Potentially Explosive Atmospheres, Implemented By The Act Of April 13, 2016 On Conformity Assessment And Market Surveillance Systems (Journal Of Laws Of 2016, Item 542) And The Regulation Of The Minister Of Development Of June 6, 2016 On Requirements For Equipment And Protective Systems Intended For Use In Potentially Explosive Atmospheres (Journal Of Laws Of 2016, Item 817), C) Belong To Group I And At Least Category M2 Within The Meaning Of The Provisions Of The Regulation Referred To In Point 2 (Devices And Protective Systems Intended For Use In Potentially Explosive Atmospheres), D) Have Technical And Operational Documentation.