Request For Quotation Other Consumables

Enamel Nts-132 (Khaki) Gost 6631-74 Is Intended For External And Internal Work, For Painting Wooden And Pre-Primed Metal Surfaces. The Enamel Coating Is Resistant To Water, Oils And Detergents. 2. Requirements For The Supplied Goods 2.1. The Enamel Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Enamel Nts-132 Gost 6631-74 Must Be Category 1, Supplied In The Manufacturer’S Packaging (30 Kg Jar), Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 60% Of The Designated Shelf Life. Metal Containers For Pouring Containers., The Grinder Disc With A Diameter Of 150 Mm Is Designed For Work In Harsh Conditions. The Scope Of Application Of Metal Cutting Discs Is Quite Wide; They Are Suitable Both For Working With Metal Profiles And For Cutting Sheet Metal, Etc. 2. Requirements For The Supplied Goods 2.1. Grinder Discs With A Diameter Of 125 Mm Must Be Category 1, Packed In Sealed Original Packaging That Protects Them From Climatic Conditions. The Supplied Goods Must Comply With Established Standards, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate)., Drills With A Diameter Of 3.2 Mm From High-Speed Steel Gost 19265 Of Accuracy Class A1 Are Intended For Drilling Holes In Structural Steels Of Increased And High Machinability With A Hardness Of 159 ... 229 Hb 2. Requirements For The Supplied Product 2.1. Drill Material – Hss-R, Minimum Diameter 2.0 Mm, Maximum Diameter 4.2 Mm. Shank Type – Cylindrical, Spiral. 2.2. Drills Must Be Category 1, Supplied In The Manufacturers Packaging, With Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., Enamel Nts-132 (Yellow) Gost 6631-74 Is Intended For External And Internal Work, For Painting Wooden And Pre-Primed Metal Surfaces. The Enamel Coating Is Resistant To Water, Oils And Detergents. 2. Requirements For The Supplied Goods 2.1. The Enamel Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Enamel Nts-132 Gost 6631-74 Must Be Category 1, Supplied In The Manufacturer’S Packaging (30 Kg Jar), Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 60% Of The Designated Shelf Life. Metal Containers For Pouring Containers., Enamel Nts-132 (Blue) Gost 6631-74 Is Intended For External And Internal Work, For Painting Wooden And Pre-Primed Metal Surfaces. The Enamel Coating Is Resistant To Water, Oils And Detergents. 2. Requirements For The Supplied Goods 2.1. The Enamel Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Enamel Nts-132 Gost 6631-74 Must Be Category 1, Supplied In The Manufacturer’S Packaging (30 Kg Jar), Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 60% Of The Designated Shelf Life. Metal Containers For Pouring Containers., Nts-132 (Protective) Enamel Gost 6631-74 Is Intended For External And Internal Work, For Painting Wooden And Pre-Primed Metal Surfaces. The Enamel Coating Is Resistant To Water, Oils And Detergents. 2. Requirements For The Supplied Goods 2.1. The Enamel Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Enamel Nts-132 Gost 6631-74 Must Be Category 1, Supplied In The Manufacturer’S Packaging (30 Kg Jar), Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 60% Of The Designated Shelf Life. Metal Containers For Pouring Containers., 1.1. Heat-Shrinkable Tubes With A Diameter Of 19.0 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., Drills With A Diameter Of 3.5 Mm From High-Speed Steel Gost 19265 Of Accuracy Class A1 Are Intended For Drilling Holes In Structural Steels Of Increased And High Machinability With A Hardness Of 159 ... 229 Hb 2. Requirements For The Supplied Product 2.1. Drill Material – Hss-R, Minimum Diameter 2.0 Mm, Maximum Diameter 4.2 Mm. Shank Type – Cylindrical, Spiral. 2.2. Drills Must Be Category 1, Supplied In The Manufacturers Packaging, With Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., Drills With A Diameter Of 4.0 Mm From High-Speed Steel Gost 19265 Accuracy Class A1 Are Intended For Drilling Holes In Structural Steels Of Increased And High Machinability With A Hardness Of 159 ... 229 Hb 2. Requirements For The Supplied Product 2.1. Drill Material – Hss-R, Minimum Diameter 2.0 Mm, Maximum Diameter 4.2 Mm. Shank Type – Cylindrical, Spiral. 2.2. Drills Must Be Category 1, Supplied In The Manufacturers Packaging, With Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1. Product Description 1.1. Heat-Shrinkable Tubes With A Diameter Of 4 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., The Grinder Disc With A Diameter Of 125 Mm Is Designed For Work In Harsh Conditions. The Scope Of Application Of Metal Cutting Discs Is Quite Wide; They Are Suitable Both For Working With Metal Profiles And For Cutting Sheet Metal, Etc. 2. Requirements For The Supplied Goods 2.1. Grinder Discs With A Diameter Of 125 Mm Must Be Category 1, Packed In Sealed Original Packaging That Protects Them From Climatic Conditions. The Supplied Goods Must Comply With Established Standards, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate)., 1.1. Fuse Sp-5 (Glass Fuse) Is Designed To Protect Electrical Networks From Overloads And Short-Circuit Currents. Rated Operating Current – ​​5A; Rated Voltage - 30V. Operating Conditions: Operating Temperature Range From -600C To +1000C. Climatic Design – Moderate And Cold Climate. 2. Requirements For The Supplied Goods 2.1. Sp-5 Fuses Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Sp-5 Fuses Must Not Have Mechanical Damage, Chips, Scratches, Or Signs Of Oxidation. Each Fuse Must Be Wrapped In Its Original Packaging. The Supplied Batch Must Have Accompanying Documents (Passports Or Labels, Quality Certificate) Confirming The Origin Of The Goods., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 320 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Epoxy Adhesive 88P (Glue 88 Np) Is Used For Cold Gluing Of Rubbers Based On General Purpose Rubbers To Metal, Including Painted Surfaces, Glass, Wood And Other Materials, And Is Also Used For Gluing Rubber To Rubber. Products Glued With 88P Glue Are Operational At Temperatures From -500C To +700C. Products Glued With 88P Glue (With Sealed Ends And Edges) Can Be Used In Sea And Fresh Water. Glue 88P Does Not Cause Corrosion Of Steel And Aluminum Alloys. Adhesive 88P Is Made On The Basis Of Rubbers Nk, Skn, Skb, Sks, Skms, And Nayrite. Name Of Indicator Norm According To Gost (Tu 38.105540-85) Exposure Time From 5 Minutes To 2 Hours Complete Curing Time, H 24 Viscosity V3-246, C Not Less Than 45 Number Of Layers 1-2 Shelf Life, L 5 Packaging, L 20 2. Requirements For The Supplied Goods 2.1. The Glue Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Glue Must Be Category 1, Produced In The Manufacturers Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Designated Shelf Life., 1.1. Glue Vk-9 Pi 1.2A.526-99 Is A Two-Component Cold-Curing Epoxy Composition. Consisting Of Epoxy And Polyamide Resins, Modified Silicon With Organic Compounds And Mineral Fillers (Asbestos, Boron Nitride, Titanium Dioxide, Etc.). For Adhesive, Glue-Welded And Adhesive-Threaded Joints Made Of Steel, Aluminum, Magnesium And Titanium Alloys, Non-Metallic Materials In Structures Operating From Minus 60°C To Plus 125°C. 2. Requirements For The Supplied Goods 2.1. The Glue Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Glue Must Be Category 1, Produced In The Manufacturers Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Assigned Shelf Life. Metal Containers For Pouring Containers., 1.1. Electrodes With A Diameter Of 3.0 Mm Gost 5117-2012 1 Pack Of At Least 5 Kg Are Metal Rods Made From Special Steel Welding Wire With A Diameter Of 1...12 Mm And A Length Of 200 To 450 Mm, On The Surface Of Which Coatings Of Certain Compositions And Thickness Are Applied. The Selection Of Materials For The Electrode Rod And Coating Ensures That The Requirements For Electrodes For Manual Arc Welding Are Met. The Most Common Are Electrodes With A Diameter Of 3 To 6 Mm. 2. Requirements For The Supplied Goods 2.1. Electrodes With A Diameter Of 2.0 Mm Must Comply With Gost, Provide The Required Mechanical Properties Of The Deposited Metal And Welded Joint, In Accordance With The Technical Specifications For The Product Being Welded. Electrodes Must Have Good Technological And Welding Properties: Allow For Welding On Direct And Alternating Current; Ensure Easy Ignition And Stable Combustion Of The Arc Without Arc Breaks And Excessive Spattering Of Metal And Slag; Have Uniform Melting Of The Coating And Uniform Distribution Of Slag On The Surface Of The Weld With Easy Removal After Welding; There Should Be No Pores, Cracks Or Slag Inclusions In The Deposited Metal; The Coating Components Should Not Be In Short Supply And Expensive; During The Welding Process, No Harmful Working Gases Or Vapors Should Be Released; Electrode Coatings Must Have Sufficient Strength And Moisture Resistance. 2.2. Electrodes Must Be Category 1, Packaged In Sealed Original Packaging That Protects Them From Exposure To Climatic Conditions. The Supplied Goods Must Comply With Established Standards, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 5 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., The Grinder Disc With A Diameter Of 180 Mm Is Designed For Work In Harsh Conditions. The Scope Of Application Of Metal Cutting Discs Is Quite Wide; They Are Suitable Both For Working With Metal Profiles And For Cutting Sheet Metal, Etc. 2. Requirements For The Supplied Goods 2.1. Grinder Discs With A Diameter Of 125 Mm Must Be Category 1, Packed In Sealed Original Packaging That Protects Them From Climatic Conditions. The Supplied Goods Must Comply With Established Standards, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate)., 1.1. Cotton Technical Fabric For The Aviation Industry (Aircraft Fabric Ast-100) Gost 14619-69 - Its Main Purpose Has Found Itself In The Aircraft Industry. More Precisely, It Is Used To Cover Fuselages, Wings, And Control Surfaces. After Applying The Main Coating, They Can Serve As Cladding. This Is A Very Good Fabric For Upholstery, But Will Be A Little Heavy For Light Cars. Made From High Quality Cotton And Incredibly Durable. 2. Requirements For The Supplied Goods. 2.1. Aviation Fabric Ast-100 Must Be Manufactured In Accordance With The Requirements Of Gost 14619-69 According To Technological Regulations Approved In The Prescribed Manner. 2.2. Aviation Fabric Ast-100 Must Be Category 1, Supplied In The Manufacturer’S Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate)., 1.1. Electrodes With A Diameter Of 2.0 Mm Gost 5117-2012 1 Pack Of At Least 5 Kg Are Metal Rods Made From Special Steel Welding Wire With A Diameter Of 1...12 Mm And A Length Of 200 To 450 Mm, On The Surface Of Which Coatings Of Certain Compositions And Thickness Are Applied. The Selection Of Materials For The Electrode Rod And Coating Ensures That The Requirements For Electrodes For Manual Arc Welding Are Met. The Most Common Are Electrodes With A Diameter Of 3 To 6 Mm. 2. Requirements For The Supplied Goods 2.1. Electrodes With A Diameter Of 2.0 Mm Must Comply With Gost, Provide The Required Mechanical Properties Of The Deposited Metal And Welded Joint, In Accordance With The Technical Specifications For The Product Being Welded. Electrodes Must Have Good Technological And Welding Properties: Allow For Welding On Direct And Alternating Current; Ensure Easy Ignition And Stable Combustion Of The Arc Without Arc Breaks And Excessive Spattering Of Metal And Slag; Have Uniform Melting Of The Coating And Uniform Distribution Of Slag On The Surface Of The Weld With Easy Removal After Welding; There Should Be No Pores, Cracks Or Slag Inclusions In The Deposited Metal; The Coating Components Should Not Be In Short Supply And Expensive; During The Welding Process, No Harmful Working Gases Or Vapors Should Be Released; Electrode Coatings Must Have Sufficient Strength And Moisture Resistance. 2.2. Electrodes Must Be Category 1, Packaged In Sealed Original Packaging That Protects Them From Exposure To Climatic Conditions. The Supplied Goods Must Comply With Established Standards, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate).