Request For Quotation Purchase Of A Diesel Generator. Before Submitting The Application, Agree On 8747 594 5287

Purchase, Installation And Connection Of A Diesel Power Station Generator - 62.5 Kva/50 Kw No Less, Max. 70 Kva/56 Kw No Less, Engine Ricardo R4105zd Rotation Speed - No Less Than 1500 Rpm, E.G. Generator Output - No Min.400/230V, Degree Of Protection – N, No Min.-Ip23 Insulated, Number Of Phases – No Less Than 3, Power – No Less Than 0.8, Plus No. No Less Than 4, Frequency – No Less Than 50 Hz Number Of Support Bearings – One Support, Voltage Stabilizer – Avr Voltage Regulator, + -0.5%, Alternative Type – Without Brush Short Circuit Current -300% Per Sec. Rubber Iek 3P 250A.4.5 Ka 400B Shield Included. Connection Type - Star, Engine Speed - At Least 4 Cylinders. Air Intake System - Turbo Charged, Light Ratio - At Least 16:1, Circulation And Electric Regulator, Injection System - Direct, Cooling System - At Least 24 V.Akum. – Not Less Than 24 V, V-Oil. Syst.-Not Men 24L, V-Syst. Cooling – No Less Than 35 L Fuel Tank – No Less Than 80 L, 100% Consumption – Fuel Consumption No Less Than 11.4 L/H, 75% -10.1 L/H, Noise-Proof Volume – No Less Than 1250 Mm, Width – No Less Than 900 Mm, Height – No Less Than 1250 Mm, Frame Weight – No Men.1100Kg, Control Panel/Automatic Transfer Switch. Connection Sip-2 Sec. 4 * 50Mm 400M, With Components For Connecting From The Substation And Boiler Room On Concrete Foundations, Fencing And Shelter For Diesel Generator. Commissioning Works: General Installation And Commissioning. Warranty Not Less Than 12 Months Or 1000 Motor Hours Readiness Of Equipment For Operation Technical Kit Documents And Service Documents, Technical Passport, Commissioning And Repair. Work As Trailed Equipment: Delivery Time After Signing The Contract Is 20 Calendar Days. The Cost Of The Equipment Includes: 1. Diesel Generator With All Installed Equipment. 2. Battery And Ats For The Generator And Control Panel. 3. Fill The Winter D/T With Full Antifreeze. 4. Readiness Of The Equipment For Operation.5.Carrying Out Commissioning Work.6.Testing The Diesel Generator Under Conditions Of 100% Load, Ensuring The Load Module For 48 Hours.And After The Test, Drive It Under Load For 48 Hours For All Tests From The Supplier.7.Complete Of Technical And Service Documents.8.Acceptance Of The Diesel Generator In Strict Accordance With The Technical Specifications Conditions.9.Installed In A Room With A Window.10.Installed A Tray Filled With Cement Into The Base Of The Power Plant.Spare Kit (Injector Kit, Engine Oil For Subsequent Replacement With Filter, Air Filter, Belts).