Request For Quotation Acquisition Of Other Fixed Assets

Technical Specification - Minimum Parameters 1. Output Power (Rms, 4 Ω, Two Channels) O Not Less Than 2 × 1000 W 2. Output Power (Rms, 8 Ω, Two Channels) O Not Less Than 2 × 600 W 3. Load Resistance (At Maximum Power Up To) O Should Be Supported Up To ≈ 4 Ω, Preferably Up To 2.66 Ω For Dynamic Reserve 4. Thd (Undistorted Harmonics), 1 Khz O Input “Microphone → Main Outputs” At +16 Dbu Level: No More Than 0.005% O Power Amplifier (Inputs → Acoustic Outputs): No More Than 0.075% 5. Bandwidth (−3 Db) O Any Input → Any Mixer Output: Not Lower Than 15 Hz ... 70 Khz O Any Input → Dynamic (Loudspeaker) Outputs: Not Lower Than 20 Hz ... 30 Khz 6. Signal-To-Noise Ratio (S/N), Power Amplifier, 4 Ω Load, A-Weighted O Not Less Than 105 Db 7. Equivalent Input Noise (Mic Input, A-Weighted, 150 Ohms) O No More (That Is, No Worse) −130 Dbu 8. Input Sensitivity (All Controls At Maximum) O Microphone: No Higher (In The Sense Of Requiring Less Signal) −74 Dbu O Line Inputs (Mono): No Higher Than −54 Dbu O Line Inputs (Stereo): No Higher Than −34 Dbu